J-Array brackets for 4 cabinets in each array

Post your build odyssey here.
Post Reply
Message
Author
vesthardt
Posts: 33
Joined: Thu Jan 22, 2015 4:55 pm
Location: Denmark in Europe

J-Array brackets for 4 cabinets in each array

#1 Post by vesthardt »

Hello!
I can't figure out from looking at the plans how to setup the brackets for 4 cabinets per side in the J-array. Anyone who can help me understand? :)

Thanks,
vesthardt
Top
User avatar
Bill Fitzmaurice
Site Admin
Posts: 28646
Joined: Tue May 02, 2006 5:59 pm

Re: J-Array brackets for 4 cabinets in each array

#2 Post by Bill Fitzmaurice »

Look at your Sketchup. Four is the same as three, with one more added to the pile.
Top
vesthardt
Posts: 33
Joined: Thu Jan 22, 2015 4:55 pm
Location: Denmark in Europe

Re: J-Array brackets for 4 cabinets in each array

#3 Post by vesthardt »

So the extra cab should just be same angle as the top one without spacing between them?
Built:
4x Titan48, 18" wide loaded with Kappalite 3015LF
Bought:
2x DR250 w/ deltalite 2510 II
Building:
8x Omnitop 12 J-array w/ Delta Pro 12A and Melded/flat tweeter arrays
4x Titan48 18" wide w/ Kappalite 3015LF
Top
User avatar
Bill Fitzmaurice
Site Admin
Posts: 28646
Joined: Tue May 02, 2006 5:59 pm

Re: J-Array brackets for 4 cabinets in each array

#4 Post by Bill Fitzmaurice »

The angles that the cabs are set at depends on your installation. That's why there are multiple holes in the brackets, so they can be set as required.
Top
Post Reply

Return to “Build Threads”