Titan 48 & DR300 Build
-
- Posts: 19
- Joined: Sat Feb 23, 2013 1:35 pm
Titan 48 & DR300 Build
Hi all, i'm new too the Forum and have been following Bill's Cab's for a while now and FINALLY have decided on building a herd myself...i've decided too build (2) Titan 48's & (2) DR300's too test my build skill with these new designs. I've built alot of replica stuff from different brands and didn't do too bad. My target system for 2013 is (24) Titan 48's & (18) DR300's [/color]so hope ya'll like what you see and i can get help from time too time when i can. I'll post some of my recent builds for your viewing pleasure
Thanks,
a fellow builder
Guido
Thanks,
a fellow builder
Guido
-
- Posts: 19
- Joined: Sat Feb 23, 2013 1:35 pm
Re: Titan 48 & DR300 Build
Oh and what driver is REALLy the better choice for the Titan 48...is it the Eminence Kappalite 3015LF or the 18 Sound NLW9300???
Thanks in advance
Thanks in advance
Re: Titan 48 & DR300 Build
Really? Which stadium do you run sound for? I am interested to see this build.Guido La Fond wrote:(24) Titan 48's & (18) DR300's
I'll post some of my recent builds for your viewing pleasure
3015LF is probably the most common choice out of the 15's, and should provide very similar output to the 18 sound.Guido La Fond wrote:Oh and what driver is REALLy the better choice for the Titan 48...is it the Eminence Kappalite 3015LF or the 18 Sound NLW9300???
Thanks in advance
Re: Titan 48 & DR300 Build
if you have room in the budget go with the 18sound then just limit like its the 3015lf and you'll never blow one
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Titan 48 & DR300 Build
huh?sine143 wrote:if you have room in the budget go with the 18sound then just limit like its the 3015lf and you'll never blow one
I don't understand, why buy the 18 sounds and then take 20V off their war volume?
I would have figured, with a rig as big as the OP is intending, that every last ounce of juice would count...
Ryan,
the 3015lf limit is 60V and the 18sound 80V, I think there's quite a bit more output in the 18sound based cabs...
edit: My apologies, where's my manners. Hello and welcome to the forum
I'll be very interested in your progress as well...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Titan 48 & DR300 Build
Is it too early for that? 24 Titan 48's? This, I gotta see. If I'm wrong, I will happily apologize as I drool over the build pics. But I would think someone with the money to build and transport that kind of herd doesn't need to go the DIY route. Even if I fell into $50K or $100K tonight, I'd build 8 Titan 24's and 8 OTops 12's for my little DJ business and be done with my rig.
So, good luck and please prove me wrong; I'd love to see the pics. Welcome to the forum, by the way. Remember: Rule #1 is "Pics or no cabs."
So, good luck and please prove me wrong; I'd love to see the pics. Welcome to the forum, by the way. Remember: Rule #1 is "Pics or no cabs."
T48 build thread: http://billfitzmaurice.info/forum/viewt ... 30&t=20315
OTop12 build thread: http://billfitzmaurice.info/forum/viewt ... 30&t=19214
OTop12 build thread: http://billfitzmaurice.info/forum/viewt ... 30&t=19214
Re: Titan 48 & DR300 Build
I guess I'd assume that 24 t48s are basically gonna eat lunch with whatever is thrown at them, regardless of driver, esp if they are all built wider. the wider the better.
And... i'd hate to have to find the blown driver in that group if it happens, and it's happened to me 3 time
And... i'd hate to have to find the blown driver in that group if it happens, and it's happened to me 3 time
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
Re: Titan 48 & DR300 Build
That's funny, the 18sound has less xmax than the 3015. How will it take 20 more volts? I think not. Is the 80v for use as a top, perhaps?Grant Bunter wrote: huh?
I don't understand, why buy the 18 sounds and then take 20V off their war volume?
I would have figured, with a rig as big as the OP is intending, that every last ounce of juice would count...
Ryan,
the 3015lf limit is 60V and the 18sound 80V, I think there's quite a bit more output in the 18sound based cabs...
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Titan 48 & DR300 Build
From the T48 plans:Ryan A wrote:That's funny, the 18sound has less xmax than the 3015. How will it take 20 more volts? I think not. Is the 80v for use as a top, perhaps?Grant Bunter wrote: huh?
I don't understand, why buy the 18 sounds and then take 20V off their war volume?
I would have figured, with a rig as big as the OP is intending, that every last ounce of juice would count...
Ryan,
the 3015lf limit is 60V and the 18sound 80V, I think there's quite a bit more output in the 18sound based cabs...
"The 3015LF, 4015LF and Lab 15 limit is 60 volts. The limit of the 12NLW9300 is 70 volts, that of the 15NLW9300 80 volts."
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Titan 48 & DR300 Build
Understood, its just interesting that the 18 sound needs 80 volts to reach its modest 8 mm xmax. Perhaps it exceeds its linear mathematical xmax by a bit on that voltage...
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: Titan 48 & DR300 Build
Or it could be less sensitive.Ryan A wrote:Understood, its just interesting that the 18 sound needs 80 volts to reach its modest 8 mm xmax. Perhaps it exceeds its linear mathematical xmax by a bit on that voltage...
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Michael Ewald Hansen
- Posts: 638
- Joined: Tue Aug 16, 2011 10:43 am
- Location: Denmark
Re: Titan 48 & DR300 Build
Its more likely that the 3015LF is limited due to thermal capabilities (60v is 450w in 8ohm) and the 18sound is displacement limited due to having higher thermal limit than displacement.. Its just a guess, Bill knows whats up and down
Authorized Builder - Denmark
Check out the BFM Facebook page
Check out the BFM Facebook page
Re: Titan 48 & DR300 Build
According to eighteensound, the maximum peak to peak excursion is 37mm That makes xmax 16.5mm!Ryan A wrote:Understood, its just interesting that the 18 sound needs 80 volts to reach its modest 8 mm xmax. Perhaps it exceeds its linear mathematical xmax by a bit on that voltage...
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Re: Titan 48 & DR300 Build
it's stated lower in the specs that Xmax is 8mm.
the 16.5 mm isn't that Xlim ?
i'm new when it comes to reading driver parameters so this could be way of.
greetz ketoet
the 16.5 mm isn't that Xlim ?
i'm new when it comes to reading driver parameters so this could be way of.
greetz ketoet
building BFM speakers isn't a hobby , it's an addiction
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
- Bas Gooiker
- Posts: 752
- Joined: Fri Jul 06, 2012 5:05 pm
Re: Titan 48 & DR300 Build
+/- 8mm thats 16mm travel.
Life is just a game, don't take it to seriously!