2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
-
- Posts: 8301
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Ok.....so, since you are down under, should you put the melded on top of the CD boxes so the folks at the equator get better dispersion?
Just wondering.......
Just wondering.......
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Grant, I know you've had these back shelved for a while. Good on ya for getting them done and done well. Congrats on the completion!
So, what's next?
So, what's next?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Another excellent build thread, Grant. They look excellent! One day I'll use this as the DR standard for when I decide to quit being a chicken and build some for myself. Thank you!
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide
Titan 39 x 4 (3012LF) 20" wide
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Bless you Bruce, always looking at the light hearted side...Bruce Weldy wrote: ↑Sun Mar 29, 2020 10:50 am Ok.....so, since you are down under, should you put the melded on top of the CD boxes so the folks at the equator get better dispersion?
Just wondering.......
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Fix up this thread (Done).
Sick to death of photo hosting watermarks and nasty e-mails from Photobucket.
I've removed as many pics as I can that were hosted, and replaced them with the originals.
Lots of cleaning up lol, including the truck.
I really want to get my LED's into road cases, either made or bought, we'll see.
A couple of amps to repair.
A 40M multicore to reterminate.
There's always something to do in this business right?...
Last edited by Grant Bunter on Mon Mar 30, 2020 4:13 am, edited 1 time in total.
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Thanks Tom
I don't know about "standard".
Just give yourself plenty of time, and use fresh ply...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
- Strange Kevin
- Posts: 161
- Joined: Fri May 19, 2017 3:02 pm
- Location: Scottsdale AZ
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Hey Grant,
Great looking cabs!
I especially like the stacking brackets!
Also, thanks for going back and re uploading all the old photos!
It could be invaluable help to future builds, and made re-reading through a lot more fun for me too!
Great looking cabs!
I especially like the stacking brackets!
Also, thanks for going back and re uploading all the old photos!
It could be invaluable help to future builds, and made re-reading through a lot more fun for me too!
Authorized Builder - Phoenix AZ.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
I’ve been plugging away at the second pair of these for ages, then there’s the mounting brackets. I called them done, and they now are
Today is Anzac Day in Australia, where we remember all who served, especially at Gallipoli.
Due to the virus, we couldn’t have our usual large services with marching and so on.
My brief was to “broadcast “ the service so our village could hear it at 6am.
I did that with:
Today is Anzac Day in Australia, where we remember all who served, especially at Gallipoli.
Due to the virus, we couldn’t have our usual large services with marching and so on.
My brief was to “broadcast “ the service so our village could hear it at 6am.
I did that with:
Last edited by Grant Bunter on Fri Apr 24, 2020 6:56 pm, edited 2 times in total.
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 8301
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
I thought pictures from down under would be upside down, not sideways......guess I really don't understand geography.....
Great job Grant! Fine looking build....as always...
Great job Grant! Fine looking build....as always...
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Those came out really nice Grant. Good job.
And, my hat's off to Australian military service men and women... past, present, and future.
And, my hat's off to Australian military service men and women... past, present, and future.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Weird, couldn't quote and post when you mentioned pics being sideways Bruce.
Hopefully sorted that.
I get now what you mean about CD's with Piezo's, so much smoother.
Did I say I love these designs?
I had em stinking loud this morning, all over the village heard them, but they were sooooo clear...
Hopefully sorted that.
I get now what you mean about CD's with Piezo's, so much smoother.
Did I say I love these designs?
I had em stinking loud this morning, all over the village heard them, but they were sooooo clear...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Bill Fitzmaurice
- Site Admin
- Posts: 28620
- Joined: Tue May 02, 2006 5:59 pm
Re: 2 x DR250 (melded) + 2 x DR250 (CD horn) March 2012 plans. Completed
Thousands of WWII US GIs who were stationed in Oz were eternally grateful to the ANZACs... for having been shipped out to North Africa.SethRocksYou wrote: ↑Fri Apr 24, 2020 6:08 pm And, my hat's off to Australian military service men and women... past, present, and future.
Rommel wasn't so happy about it, though.