PRO SLA finished
Re: PRO SLA finished
Thanks guys, these SLA's make me want to build Otop12's...perfectly good excuse! LoL
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Dangit, seeing these makes me want a pair of these too? You guys are making it hard on me to settle on what I want to make first!
Great job on these. They look great!
Great job on these. They look great!
Something Witty
- Drey Chennells
- Posts: 1377
- Joined: Sun May 17, 2009 10:12 pm
- Location: Central FL ~Authorized Builder
- Contact:
Re: PRO SLA finished
How do you mean? Nice touch on the grillDanielNY wrote:Thanks guys, these SLA's make me want to build Otop12's...perfectly good excuse! LoL
Last edited by Drey Chennells on Mon Apr 30, 2012 11:28 am, edited 2 times in total.
"Things happen, but music stays in your blood forever~." bf
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
Re: PRO SLA finished
There are two cleats (3/4" x 1/2" x 10-3/4"), one at the top and one at the bottom. The grill is bent 3/4" on all sides so the bolts go through the cabinet edge, through the grill, through the cleat and right into the t-nut. I didn't want anything on the face to keep that clean look. All the pieces are black so it blends right in although the picture I posted didn't have them installed since I wanted to show a picture with the grill off.
I will post a picture of the mounting...soon!
I will post a picture of the mounting...soon!
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Hi DanielNY, I lived in NY long Island for 22 years and DJ there for 7.5 years, can you post the pics on how it is mounted and where did you get all pieces on the front of the cab? I will be building these next as DJ monitors with subs, currently building T24's with dual BP-102's, Thanks!
BaasssS, . . how low can you GO!
Re: PRO SLA finished
Thanks for the compliment!
The grill was mounted with t-nuts/bolts, I will post pictures below. Standbydjlivex wrote:...can you post the pics on how it is mounted
The grill was purchased from reliablehardware.comdjlivex wrote: ...and where did you get all pieces on the front of the cab?
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Excuse the pics, not very sharp.
So I made some wood cleats and notched where the alpha6 needs to clear, and painted black. Then I attached them to the grill with epoxy (the pic with the clamps is holding the cleat in place while the epoxy cures). Then I drilled through matching sets of holes in the grill to add the t-nuts with some more epoxy to secure the nuts.
Then I aligned the grill to the upper and lower lip to drill holes for the bolt to pass through. After adding the grill I decided to install a support bracket for the grill right between the middle woofers. Will take a pic and post later tonight.
Hope this helps.
So I made some wood cleats and notched where the alpha6 needs to clear, and painted black. Then I attached them to the grill with epoxy (the pic with the clamps is holding the cleat in place while the epoxy cures). Then I drilled through matching sets of holes in the grill to add the t-nuts with some more epoxy to secure the nuts.
Then I aligned the grill to the upper and lower lip to drill holes for the bolt to pass through. After adding the grill I decided to install a support bracket for the grill right between the middle woofers. Will take a pic and post later tonight.
Hope this helps.
Last edited by DanielNY on Mon May 07, 2012 12:47 pm, edited 1 time in total.
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Here is the final picture of the bolt that goes through the top and bolts into the t-nut/cleat behind the grill.
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Great looking cabs. I hope you have covers for those. Their way to pretty to scratch.
2 SLA PRO (built by Leland)
2 T39 24" 3012LF (built by Leland)
2 Jack 10's (built by Leland)
4 Wedgehorn 8's (built by Leland)
1 XF210 w/Legend 1028 (built by Leland)
2 T39 24" 3012LF (built by Leland)
2 Jack 10's (built by Leland)
4 Wedgehorn 8's (built by Leland)
1 XF210 w/Legend 1028 (built by Leland)
Re: PRO SLA finished
la80vette wrote:Great looking cabs. I hope you have covers for those. Their way to pretty to scratch.
Your right< now that you mention it, I remember seeing a custom cover maker on ebay. Gonna check that out...
any recommendations?
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's
Re: PRO SLA finished
Hi I see that you made alot of effort on these pics, thanks I hate to sound like a copycat! hehehe will post pics when I am done with my Pro SLA.
BaasssS, . . how low can you GO!
Re: PRO SLA finished
There is a vendor with the moniker D2F for Designed to Fit. I have a cover for an amp from them. Good stuff. I highly recommend
http://stores.ebay.com/D2F-Designed-2-F ... 4340.l2563
http://stores.ebay.com/D2F-Designed-2-F ... 4340.l2563
-
- Posts: 429
- Joined: Tue Sep 06, 2011 12:57 am
- Location: Anchorage, AK
Re: PRO SLA finished
My SLA Pros are currently still stuck inside a sheet of plywood in the corner of my garage, but I really, really like what you did here. Would you be offended if I take a cue from that?
I also really like Drey's sloped braces, so if you're reading this, that goes for you too.
I also really like Drey's sloped braces, so if you're reading this, that goes for you too.
Re: PRO SLA finished
No issue here Sir! let me know if you have any questions.
Built: T-60's, T48's, T-39's, DR250's, DR200's, Pro SLA's