ART SLA-2 1 rack space to power Omni12TB
ART SLA-2 1 rack space to power Omni12TB
Ok so I have been using my Omni 12 TB with an EV 7100 75 watt/channel amp for home practice DJ sets and house DJ gigs. Since the Pandemic I have done 3 gigs (Halloween,Christmas, Birthday) parties with this setup and its loud enough for home use. Theres a lot of oomph on the bottom, even at 50 Hz its enough to get the crowd dancing with just the 12" bass section of the Tb. So I was thinking of getting a little more power with this new ART SLA-2 amp 200 watts/channel. I have just been booked 2 x outdoor bday party in late March and April same venue its a hall with a big patio 30'x50' cement open air space which will be an outdoors dance and mingling area that I will provide Dj music for. Im thinking the ART would power the TB's better than the EV's. Thanks for your help.
BaasssS, . . how low can you GO!
-
- Posts: 8322
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: ART SLA-2 1 rack space to power Omni12TB
For the same money, you can get a 215 watt per channel Crown XLS1002. While it's a 2 space unit, it weighs only 9 pounds, has xlr inputs, speakon outputs, and will definitely have a much better re-sale value should you decide to unload it.
More features, half the weight are the upside.....2 space vs. 1 is the downside.....as long as there is room in your rack - it's a no brainer.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Re: ART SLA-2 1 rack space to power Omni12TB
Yes Bruce I see that I just finished a 6 space plywood diy rack with casters and I try to keep it as small as possible for the space in a small suv. I am building another rack for a 3 way for a Crown XLS 2502 as sub amp.
BaasssS, . . how low can you GO!
Re: ART SLA-2 1 rack space to power Omni12TB
Just one O12TB, right? Are you just using one channel of the amp or are you bridging it?
Last edited by Seth on Tue Feb 02, 2021 12:55 pm, edited 1 time in total.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: ART SLA-2 1 rack space to power Omni12TB
Oops. Mistake post. Deleated.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421