Send the OP a PM. He may (or may not) get email notifications.
My 3D printed Diffraction horn for compression drivers OTOP12
Re: My 3D printed Diffraction horn for compression drivers OTOP12
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: My 3D printed Diffraction horn for compression drivers OTOP12
Id like to find the .stl and try to print one
Finished and making Music - TAT 16" with MCM 8
T39,s with HL10C sold
coming up Otop 12 and unknown Sub
T39,s with HL10C sold
coming up Otop 12 and unknown Sub
- Bill Fitzmaurice
- Site Admin
- Posts: 28647
- Joined: Tue May 02, 2006 5:59 pm
Re: My 3D printed Diffraction horn for compression drivers OTOP12
The OP hasn't been here for two years.
Re: My 3D printed Diffraction horn for compression drivers OTOP12
You might try the wayback machine at web.archive.org.
Look for https://uwpltd.com around the time the post was made.
Look for https://uwpltd.com around the time the post was made.