yes, eminence low drivers are no problem. only the 1" isn't available here.Grant Bunter wrote: ↑Wed Dec 16, 2020 2:37 pmHi!
Eminence is stocked at Thoman.de, so should be widely available through Europe...
Jack12 or OmniTop12
Re: Jack12 or OmniTop12
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Jack12 or OmniTop12
Understood.deroy wrote: ↑Wed Dec 16, 2020 3:25 pmyes, eminence low drivers are no problem. only the 1" isn't available here.Grant Bunter wrote: ↑Wed Dec 16, 2020 2:37 pmHi!
Eminence is stocked at Thoman.de, so should be widely available through Europe...
They do get eminence in though, so have access to whatever you want.
Send them an e-mail. it might be possible...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Jack12 or OmniTop12
Also, with other brands, check the dimensions of the compression drivers carefully.
There's not unlimited room to fit deeper or wider than the recommended driver...
There's not unlimited room to fit deeper or wider than the recommended driver...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...