Question about "Bi amping"

For unmatched sensitivity.
Message
Author
himhimself
Posts: 268
Joined: Fri Nov 13, 2015 9:34 pm
Location: Bloomington IN

Re: Question about "Bi amping"

#16 Post by himhimself » Thu May 23, 2019 7:49 am

When I’m home all I wanna do is adjust parameters and play when it’s a paid gig I want it simple and sturdy
Yes, wisdom!!!
2xT30 (20", 3012lf)
4xOtop Jarray

User avatar
BrentEvans
Posts: 3030
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: Question about "Bi amping"

#17 Post by BrentEvans » Thu May 23, 2019 1:43 pm

Bill Fitzmaurice wrote:
Wed May 22, 2019 9:00 pm
An L-Pad costs a lot less than an amp. :mrgreen:
And is less precise, less repeatable, can't save and recall settings, limited to one crossover slope.on the internal crossover...

Biampd cabs are better, but not simpler or cheaper.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.

Lustyik
Posts: 76
Joined: Sat Sep 28, 2013 10:54 am
Location: Hungary

Re: Question about "Bi amping"

#18 Post by Lustyik » Fri May 24, 2019 1:39 am

Thanks for all,

I will use NSDs because I have 4 in my drawer.

I have forgotten that performance is down because of the 16 ohm load. :wall:

I have enough amplifiers for a three-way system, but if you don't have a significant positive effect, it doesn't make sense.
Simplicity is a higher priority for me, especially if I can't win anything.
Built: 2x OT12 (2512; NSD)
Ongoing: 2x T39 (3012)


PreSonus sl 16.4.2
Driverack PA
Driverack PX
PKN XD2500 (2x650w / 8ohm)
PKN LC4004 (4x500w / 8ohm)

Post Reply