Eminence Delta 10a any good?

For unmatched sensitivity.
Post Reply
Message
Author
User avatar
Starchild
Posts: 75
Joined: Mon Oct 03, 2016 10:07 pm
Location: The Caribbean

Eminence Delta 10a any good?

#1 Post by Starchild » Sat May 30, 2020 2:53 pm

Hi guys! It's been a while. Quick question, I got a pair of Eminence Delta 10a and was wondering if there were any BFM cabs in which they might work? I have the plans for the DR280 but the t/s parameters are a little off so a little educational input would be greatly appreciated.
Thanks in advance :fingers:

SethRocksYou
Posts: 934
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Eminence Delta 10a any good?

#2 Post by SethRocksYou » Sat May 30, 2020 3:48 pm


Grant Bunter
Posts: 6398
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Eminence Delta 10a any good?

#3 Post by Grant Bunter » Sat May 30, 2020 4:08 pm

Starchild wrote:
Sat May 30, 2020 2:53 pm
Hi guys! It's been a while. Quick question, I got a pair of Eminence Delta 10a and was wondering if there were any BFM cabs in which they might work? I have the plans for the DR280 but the t/s parameters are a little off so a little educational input would be greatly appreciated.
Thanks in advance :fingers:
Hey welcome back!
The Delta10A won't work in a DR280 because the DR280 is designed for 12 inch drivers, not 10's.

In this thread, Bill says they will work for a DR250:
viewtopic.php?f=2&t=24795&p=274279&hili ... 0A#p274279
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 3 with melded array.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Starchild
Posts: 75
Joined: Mon Oct 03, 2016 10:07 pm
Location: The Caribbean

Re: Eminence Delta 10a any good?

#4 Post by Starchild » Sat May 30, 2020 8:35 pm

Grant Bunter wrote:
Sat May 30, 2020 4:08 pm
Starchild wrote:
Sat May 30, 2020 2:53 pm
Hi guys! It's been a while. Quick question, I got a pair of Eminence Delta 10a and was wondering if there were any BFM cabs in which they might work? I have the plans for the DR280 but the t/s parameters are a little off so a little educational input would be greatly appreciated.
Thanks in advance :fingers:
Hey welcome back!
The Delta10A won't work in a DR280 because the DR280 is designed for 12 inch drivers, not 10's.

In this thread, Bill says they will work for a DR250:
viewtopic.php?f=2&t=24795&p=274279&hili ... 0A#p274279
My bad I meant the DR250 not the DR280, typing without my glasses lol

Post Reply