Dr 280 handels -asking advice

For unmatched sensitivity.
Post Reply
Message
Author
Lustyik
Posts: 54
Joined: Sat Sep 28, 2013 10:54 am
Location: Hungary

Dr 280 handels -asking advice

#1 Post by Lustyik » Wed Oct 25, 2017 8:26 am

Hi All,

I would like to ask your advice about handles.
I built two OT12 and I will finish my T39 soon.

Now I am ready for Dr 280...maybe.

So my question is: can I use handles for 280 that used for Dr300 pictured in the homepage? (Just one per side).

http://billfitzmaurice.com/images/cabs/DR300.jpg


Thank you!

Rgs,

J
Built: 2x OT12 (2512; NSD)
Ongoing: 2x T39 (3012)


PreSonus sl 16.4.2
Driverack PA
Driverack PX
PKN XD2500 (2x650w / 8ohm)
PKN LC4004 (4x500w / 8ohm)

Grant Bunter
Posts: 5709
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Re: Dr 280 handels -asking advice

#2 Post by Grant Bunter » Wed Oct 25, 2017 1:54 pm

Something like:
http://www.ebay.com.au/itm/Spring-Loade ... Swc0FUosDt

will take up a lot less room and not intrude into the pathway as much...
Built:
DR 250: x 2 (melded array) with March 2012 plans.
T39's: 4 x 20" BP102 , 2 x 28" 3012lf.
WH8: x 3 with melded array.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Bill Fitzmaurice
Site Admin
Posts: 25841
Joined: Tue May 02, 2006 5:59 pm

Re: Dr 280 handels -asking advice

#3 Post by Bill Fitzmaurice » Wed Oct 25, 2017 2:47 pm

You can use scoop handles, just avoid the braces. One way to mount them is to place them so that the lower flange goes over a brace, then you can drive screws into the brace.

Lustyik
Posts: 54
Joined: Sat Sep 28, 2013 10:54 am
Location: Hungary

Re: Dr 280 handels -asking advice

#4 Post by Lustyik » Thu Oct 26, 2017 10:07 am

Thank you!

Hope pictures about the building will be posted soon...
Built: 2x OT12 (2512; NSD)
Ongoing: 2x T39 (3012)


PreSonus sl 16.4.2
Driverack PA
Driverack PX
PKN XD2500 (2x650w / 8ohm)
PKN LC4004 (4x500w / 8ohm)

Post Reply