Autotuba hook up
Autotuba hook up
hey guys I built a 12 " wide autotuba for a friend, now me not being a car guy how should he set up his amp?
300w amp, turn the boost off but what should he set the HPF and LPF( might be limited to 50hz)
Let me know
300w amp, turn the boost off but what should he set the HPF and LPF( might be limited to 50hz)
Let me know
Re: Autotuba hook up
We'll need to know more information about the settings available.
Is it one switch that you can change between LPF/OFF/HPF? If so you'd want to set it to LPF
If there's a knob to select the crossover frequency you can set it anywhere from 50-100 hz.
If your deck can do LPF just use that, then set the amplifier to HPF and set it anywhere from 20-40 hz if available.
Is it one switch that you can change between LPF/OFF/HPF? If so you'd want to set it to LPF
If there's a knob to select the crossover frequency you can set it anywhere from 50-100 hz.
If your deck can do LPF just use that, then set the amplifier to HPF and set it anywhere from 20-40 hz if available.
Re: Autotuba hook up
ok guys i will check into it more
Re: Autotuba hook up
its an old Pyramid PB-772, still looking for info but if anyone can find a manual that would help too
Re: Autotuba hook up
If nothing else take a picture of it, showing all the knobs and switches, and post it here.
Re: Autotuba hook up
we will get more info when the weather lets up, its -28c this morning and we just got a ton of snow this weekend.
not to interested in hanging out by the car
not to interested in hanging out by the car
Re: Autotuba hook up
Haven't heard anythin' in awhile on this. The snow must be really piling up...
2-Jack 10
2-Wedgehorn 8
1-Auto Tuba
2-Wedgehorn 8
1-Auto Tuba
Re: Autotuba hook up
hahaha nope, my buddy got a dui so now the sub it at my house and i am playing with it hooked to 100 watt cheapo plate amp. kicks good enough for my kids to enjoy it. TTLS starting soon i hope
-
- Posts: 823
- Joined: Tue Dec 15, 2009 6:08 pm
- Location: Detroit,Michigan
Re: Autotuba hook up
I thought the smallest a AT could be built was 15 inches using 14 inch panels ?knobert wrote:hey guys I built a 12 " wide autotuba
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
Re: Autotuba hook up
12" panels, 13" finished is the minimum in the plans.djtrumptight wrote:I thought the smallest a AT could be built was 15 inches using 14 inch panels ?knobert wrote:hey guys I built a 12 " wide autotuba
Re: Autotuba hook up
Sorry to hear about the DUI. Hopefully all is well otherwise and he has a new respect of the law without too much of a penalty to pay.
I couldn't begin to count the # of times driving at or above the legal limit.
Does your plate amp have HP/LP capability?
My daughters 14" AT is sitting unused at her house, well it's being used as a bench by my Grandson, haha. I'm trying to figure out a way to get it back in my car. ha ha
I couldn't begin to count the # of times driving at or above the legal limit.
Does your plate amp have HP/LP capability?
My daughters 14" AT is sitting unused at her house, well it's being used as a bench by my Grandson, haha. I'm trying to figure out a way to get it back in my car. ha ha
2-Jack 10
2-Wedgehorn 8
1-Auto Tuba
2-Wedgehorn 8
1-Auto Tuba