The start of my BFM DJ rig
The start of my BFM DJ rig
Well here it is roughly a year since I first bought my drivers from Mr. Langford (thanks larry)
Two OT 12's and the first of 4 24" wide t30's.
I am having a blast building now that I have figured things out
I played the OT's in the spare bedroom at low volumes and they sound incredible
Guess I did something right
Awsome designs Bill!!!
Pic added of subs
Two OT 12's and the first of 4 24" wide t30's.
I am having a blast building now that I have figured things out
I played the OT's in the spare bedroom at low volumes and they sound incredible
Guess I did something right
Awsome designs Bill!!!
Pic added of subs
Last edited by rec on Tue Mar 23, 2010 3:42 pm, edited 2 times in total.
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
- RubiconProSound
- Posts: 597
- Joined: Sun Aug 27, 2006 3:10 am
- Location: Pollock Pines CA. (between Lake Tahoe and Sacramento...)
Re: The start of my BFM DJ rig
Sounds familiar, I also run two 24" T30's ... what are you loading the T30's with?
Built so far:
AutoTuba. TAT, T18, T30, T39, SLA, SLA Pro, DR200, Omni 12TB, Omni 12 Sub, Omni 10.5,
AutoTuba. TAT, T18, T30, T39, SLA, SLA Pro, DR200, Omni 12TB, Omni 12 Sub, Omni 10.5,
- Chris_Allen
- Posts: 3355
- Joined: Wed Jul 11, 2007 2:43 pm
- Location: Huddersfield, UK
Re: The start of my BFM DJ rig
Not to sound like a party pooper, but the first horn section below the driver appears to taper at too steep an angle.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: The start of my BFM DJ rig
Not necessarily. That section is technically the throat chamber, so the taper there isn't critical.Chris_Allen wrote:Not to sound like a party pooper, but the first horn section below the driver appears to taper at too steep an angle.
Re: The start of my BFM DJ rig
whew......got scared there for a second!
I think that are right anyway, definitly built per plans
I will be uning the 4012HO drivers in the t30's
I think that are right anyway, definitly built per plans
I will be uning the 4012HO drivers in the t30's
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
-
- Posts: 905
- Joined: Thu May 18, 2006 5:02 am
- Location: Sweden
Re: The start of my BFM DJ rig
What's the reason for your choise?rec wrote: I will be uning the 4012HO drivers in the t30's
If you havn't already bought the drivers go for the 3012LF instead, they will go louder than the 4012HO.
-2 T48 3015LF
-2 DR250 2510 crossfired
-2 DR250 2510 crossfired
- bitSmasher
- Posts: 629
- Joined: Fri May 30, 2008 2:55 am
- Location: Sydney, Aus.
Re: The start of my BFM DJ rig
It's in the (first) post?rec wrote:Well here it is roughly a year since I first bought my drivers from Mr. Langford (thanks larry)
Re: The start of my BFM DJ rig
I bought my drivers long before the 3012LF's came out, or the talk of how sweet the titian 48 is for many different applications.
I based my original decision on the fact that Bill recommended the tuba's for recorded music and that is all I will ever play. I have zero
musical ability's. So I went with the top of the line driver (at the time), I am sure that the t30 with the 4012HO will probably do everything
I need and then some.
I based my original decision on the fact that Bill recommended the tuba's for recorded music and that is all I will ever play. I have zero
musical ability's. So I went with the top of the line driver (at the time), I am sure that the t30 with the 4012HO will probably do everything
I need and then some.
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
Re: The start of my BFM DJ rig
Here are a couple of more pics of my progress. I actually have the box seal up and the driver mounted.
Hooked it up in the spare bed room and was quite impressed, I had several things vibrate off of the top shelf in the closet.
I cant wait to get the second one built and see what a pair sounds like. I have to take the driver cover off and counter
sink the holes, glue in the final two braces and put a finish on the cab. I have to admit that when I was installing the driver my hands were
shaking with excitement. It has been a long road but well worth the end result. I have three more t30's
to build and 2 more OT12's........for now. I cant quit thinking about the other designs, so I guess I have the
BFM addiction too.
Hooked it up in the spare bed room and was quite impressed, I had several things vibrate off of the top shelf in the closet.
I cant wait to get the second one built and see what a pair sounds like. I have to take the driver cover off and counter
sink the holes, glue in the final two braces and put a finish on the cab. I have to admit that when I was installing the driver my hands were
shaking with excitement. It has been a long road but well worth the end result. I have three more t30's
to build and 2 more OT12's........for now. I cant quit thinking about the other designs, so I guess I have the
BFM addiction too.
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
Re: The start of my BFM DJ rig
First half of the rig is finished....whew!
- Attachments
-
- 100_0231.JPG (67.3 KiB) Viewed 2117 times
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
-
- Posts: 105
- Joined: Wed Nov 25, 2009 12:37 pm
- Location: sunny ol'england
Re: The start of my BFM DJ rig
wow, those are looking nice! im starting my build of two 24" t30's next week and i hope the come out looking as good as yours! let me know how they sound
george
george
2 OTops completed
2 Tuba30's Delta 12LF
2 more on the way OR 4 T48's
2 Tuba30's Delta 12LF
2 more on the way OR 4 T48's
Re: The start of my BFM DJ rig
Thanks George, I am pretty proud of my build.
The sound is amazing. I have used them in a gym 3 times and I have more bass than I need
and the tops are crystal clear.
I have two more of each in the works. You will be very happy!!
The sound is amazing. I have used them in a gym 3 times and I have more bass than I need
and the tops are crystal clear.
I have two more of each in the works. You will be very happy!!
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
-
- Posts: 75
- Joined: Sat Mar 13, 2010 1:34 pm
- Location: Italy,Trento
Re: The start of my BFM DJ rig
Can you make a video of your rig and upload it on youtube (Or send me)? I'm very very very interested about the tuba 30!!!
Have:
2x FBT Jolly8ra (active)speakers (100-20.000Hz)
1x Voice System SUB VS8 (active)subwoofer (55-100Hz)
1x MTH-30 (RCF LF12G301)
2x FBT Jolly8ra (active)speakers (100-20.000Hz)
1x Voice System SUB VS8 (active)subwoofer (55-100Hz)
1x MTH-30 (RCF LF12G301)
Re: The start of my BFM DJ rig
Geko, I will see what I can do the next time I set up
My initials are in the view finder of every camcorder (REC)
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT
2xOT12(Deltalite 2512 loaded, w/melded arrays)
2xOT12(Deltalite 2512 loaded, w/flat array) "In Process"
4xT30(24", 4012HO loaded)
1xAT