Hi all from Melbourne Australia!!!
Hi all from Melbourne Australia!!!
Hi everyone newbie to builds, but designing a home theatre and decided let's go diy!!! Been reading through posts for the last week and am looking at building the SLA's...searching for drivers in oz that match the specs has not been easy so far but I'll keep searching unless someone has already found something in oz?! Either way the search will continue!!
Re: Hi all from Melbourne Australia!!!
Hi, and welcome to the forum!
We were all newbies at one time or another so, no worries. Have you checked this thread?
http://billfitzmaurice.info/forum/viewt ... 14&t=17627
We were all newbies at one time or another so, no worries. Have you checked this thread?
http://billfitzmaurice.info/forum/viewt ... 14&t=17627
TomS
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Hi all from Melbourne Australia!!!
G'day Vman
Welcome to the forum
Being in Melbourne, you have access to lots of the suppliers that carry what you need for builds here.
Maxi Ply in Lillydale has B/BB grade Birch ply. There's a couple of other carriers as well for price shopping.
Budget group in Huntingdale is the only source in Australia I can find for PL premium.
JD's Sound and Lighting sells some 15" ande drivers that will perhaps be useable in a THT.
Let us know if you find some drivers here in Australia please...
Welcome to the forum
Being in Melbourne, you have access to lots of the suppliers that carry what you need for builds here.
Maxi Ply in Lillydale has B/BB grade Birch ply. There's a couple of other carriers as well for price shopping.
Budget group in Huntingdale is the only source in Australia I can find for PL premium.
JD's Sound and Lighting sells some 15" ande drivers that will perhaps be useable in a THT.
Let us know if you find some drivers here in Australia please...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Hi all from Melbourne Australia!!!
Thanks for the warm welcome and the info guys. Will keep all the info on hand for the very near future