Long time lurker; finally decided to pull the trigger and register here on the forum.
I plan to buy the CD and start work on some speakers soon.
Expect lots of questions in a few weeks; I've been doing pro sound for a while, but I have a feeling that building speakers is going to be a whole new ball game.
Thanks in advance, gentlemen.
Greetings from Alabama!
-
Ryan Sober
- Posts: 204
- Joined: Sat Feb 01, 2014 8:34 pm
- Location: Birmingham, AL
Re: Greetings from Alabama!
Hey Ryan,
I'm not real far away over here in Statesboro, GA. Welcome man.
Donny
I'm not real far away over here in Statesboro, GA. Welcome man.
Donny
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
-
Ryan Sober
- Posts: 204
- Joined: Sat Feb 01, 2014 8:34 pm
- Location: Birmingham, AL
Re: Greetings from Alabama!
Nice to know I'm not the only Southerner here!doncolga wrote:Hey Ryan,
I'm not real far away over here in Statesboro, GA. Welcome man.
Donny
Of that I have little doubt. I have a barely used radial arm saw just waiting for some BB.Tom Smit wrote:Welcome, Ryan.
Methinks you'll be addicted.
-
Grant Bunter
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Greetings from Alabama!
G'day Ryan,
Welcome to the forum
Welcome to the forum
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Greetings from Alabama!
What do you plan on building first?
2 - OTop8
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
2 - T39
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba
-
Ryan Sober
- Posts: 204
- Joined: Sat Feb 01, 2014 8:34 pm
- Location: Birmingham, AL
Re: Greetings from Alabama!
Probably a pair or quad of T39's, followed by some OTops, then some W6's.J_Dunavin wrote:What do you plan on building first?
I have a decent older Peavey board, a rack full of outboard, and a few amps (GX3, GX5, IPR 3000).
-
jswingchun
- Posts: 1073
- Joined: Fri Dec 01, 2006 9:43 am
- Location: Cedar Rapids, Iowa
- Contact:
Re: Greetings from Alabama!
Good plan!! That's what I have, except I have W8's and that's only cuz there were no W6's when I built.Ryan Sober wrote:Probably a pair or quad of T39's, followed by some OTops, then some W6's.J_Dunavin wrote:What do you plan on building first?
I have a decent older Peavey board, a rack full of outboard, and a few amps (GX3, GX5, IPR 3000).
Omni 10
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
Omni 10.5
OmniTop 12 x 4
Wedgehorn 8 x 3
XF212
T39 @ 18" x 2
T39 @ 20" x 2
T39 @ 28" x 2
Jack 110 x 5
Jack Lite 12
XF210
XF210 (Slant only, no crossfire)
-
bassmonster
- Posts: 1384
- Joined: Wed Jul 13, 2011 9:23 am
Re: Greetings from Alabama!
.....
Last edited by bassmonster on Wed Apr 25, 2018 5:14 pm, edited 1 time in total.
Re: Greetings from Alabama!
A quick hello from up in Tennessee. Check out The Buck Wild band- they play B'ham a lot. They use 8 T48's for subs.
-
Ryan Sober
- Posts: 204
- Joined: Sat Feb 01, 2014 8:34 pm
- Location: Birmingham, AL
Re: Greetings from Alabama!
I've heard of them, but haven't had a chance to see them. Will do so when the opportunity arises.Rick Lee wrote:A quick hello from up in Tennessee. Check out The Buck Wild band- they play B'ham a lot. They use 8 T48's for subs.
-
Ryan Sober
- Posts: 204
- Joined: Sat Feb 01, 2014 8:34 pm
- Location: Birmingham, AL
Re: Greetings from Alabama!
Sorry for the necropost, but a quick followup:
After some financial mishaps, I finally ordered the CD today.
I plan to spend about 2 months or so prepping for my builds (clearing out the basement, sourcing tools and parts, studying plans, etc.), then it'll be time for the rawk.
Thanks in advance to all the posters on this board; I plan to lean hard on you very soon.
After some financial mishaps, I finally ordered the CD today.
I plan to spend about 2 months or so prepping for my builds (clearing out the basement, sourcing tools and parts, studying plans, etc.), then it'll be time for the rawk.
Thanks in advance to all the posters on this board; I plan to lean hard on you very soon.