I bought some HL10C drivers turns out one of them is a 10A and not a C, does anyone have or know where I can get a recone kit? I could build 2 more boxes if I can get one
Thanks,
Mike
HL10C recone kit?
HL10C recone kit?
Finished and making Music - TAT 16" with MCM 8
T39,s with HL10C sold
coming up Otop 12 and unknown Sub
T39,s with HL10C sold
coming up Otop 12 and unknown Sub
-
- Posts: 8319
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: HL10C recone kit?
Eminence doesn't make that kit anymore. You'll have to get really lucky to find a supplier with one in stock.....doubtful that you will.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: HL10C recone kit?
I may have some, it'll be a bit before I can make my way through the snow to my workshop to check it out.
-
- Posts: 8319
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: HL10C recone kit?
Yeah, it's cold here too......had to keep my window up most of the time while I was driving this morning....in my short-sleeved shirt.Bill Fitzmaurice wrote: ↑Tue Dec 31, 2019 12:28 pm I may have some, it'll be a bit before I can make my way through the snow to my workshop to check it out.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: HL10C recone kit?
I just got back from Vegas, where the temps were in the 50s during the day, 40s at night. I wore a short sleeve golf shirt and unlined windbreaker. I saw more than a few pussies wearing big down coats ala George Costanza. I can't imagine what they'd do in cold weather.
-
- Posts: 8319
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: HL10C recone kit?
I think it's sometimes more about fashion than comfort.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: HL10C recone kit?
I see that from numbskull teenage boys who wear shorts in the dead of winter, which around here can mean a few weeks never reaching above freezing. No, these were middle aged average Jills and Joes who must have been visiting from Panama.
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: HL10C recone kit?
I managed to get to my shop and found that I do have some HL10 kits, but they're 8 ohm HL10A. not 4 ohm HL10C.
Re: HL10C recone kit?
Bill, thank you for checking. I could make MY "C" an "A" I suppose to have a pair, but not sure what I would put them in.
Finished and making Music - TAT 16" with MCM 8
T39,s with HL10C sold
coming up Otop 12 and unknown Sub
T39,s with HL10C sold
coming up Otop 12 and unknown Sub