Mini DPDT switch acting wierd
- Charles Jenkinson
- Posts: 1125
- Joined: Sat Aug 06, 2011 3:25 pm
- Location: Manchester, UK
Mini DPDT switch acting wierd
So, I was thinking the DPDT switch was knackered since it kind of only 'half switched' to one side away from the middle position, i.e. it wouldn't detent properly fully one way. Then I got it home after a car ride and it switched fine both ways away from the middle. Anyone else had this? And is it indicative of likely future problems or just a one-time glitch?
2xJ12L (3012HO) switchable/melded
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
2xT30
Words&graphics - Audio&Acoustics - Hardware&DSP; 3 different paradigms.
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Mini DPDT switch acting wierd
Change the switch I reckon...Charles Jenkinson wrote: ↑Mon Feb 04, 2019 12:46 pm So, I was thinking the DPDT switch was knackered since it kind of only 'half switched' to one side away from the middle position, i.e. it wouldn't detent properly fully one way. Then I got it home after a car ride and it switched fine both ways away from the middle. Anyone else had this? And is it indicative of likely future problems or just a one-time glitch?
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...