driver mounting?
-
- Posts: 599
- Joined: Fri Nov 13, 2015 9:34 pm
- Location: Vancouver BC & Bloomington IN
driver mounting?
Are the driver mounting screws intended to go all the way though the mounting blocks on the back of the baffle? I wouldn't think it would matter, but wanted to ask. Got an inch of material there and figured best holding power would be to have threads all the way through it. Can't quite tell the intent from the language in the plans. thanks
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
-
- Posts: 8325
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: driver mounting?
Yes, go all the way through.himhimself wrote: ↑Tue May 29, 2018 1:23 pm Are the driver mounting screws intended to go all the way though the mounting blocks on the back of the baffle? I wouldn't think it would matter, but wanted to ask. Got an inch of material there and figured best holding power would be to have threads all the way through it. Can't quite tell the intent from the language in the plans. thanks
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: driver mounting?
The depends on the length of the screws and thickness of the driver frame you're using. The gasket seal must be airtight, so if they go through they go through, and if they don't they don't.
-
- Posts: 599
- Joined: Fri Nov 13, 2015 9:34 pm
- Location: Vancouver BC & Bloomington IN
Re: driver mounting?
Thanks, appreciate the quick replies. Will pick some up on the way home tonight and get the drivers fitted and tested.
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas