Full BFM system still going strong
Full BFM system still going strong
I built this system slowly over a couple years. T48s and OT12’s. WH10 and WH8 on stage. As pictured easily covers small festivals of a thousand or so. Modular and scalable. I’m still astonished at how good it sounds. Midas M32, Crown and QSC amps, driverack.
Re: Full BFM system still going strong
That's awesome Preston. 8 T48's and 8 OT12's seems like it would be an phenomenal setup! The deployment looks appropriately done too.
Have you used v-plates on the subs?
Have you used v-plates on the subs?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: Full BFM system still going strong
+1
Hey, look at that! 3 different sizes of T48s, which allows for great adaptability (enough rig for any gig). Good thinking.
TomS
Re: Full BFM system still going strong
I used Vplates a few times with T39s, but have never deployed with the T48s. It’s not often that I get the real estate! Most often use them lined up center. I had a good 60 feet separation here.
Yes, I have 3 different sizes. 36” is a beast, I try to actually avoid needing to move them. 18” are great for indoors and small shows. 24” really hits the sweet spot for me.
Yes, I have 3 different sizes. 36” is a beast, I try to actually avoid needing to move them. 18” are great for indoors and small shows. 24” really hits the sweet spot for me.
-
- Posts: 599
- Joined: Fri Nov 13, 2015 9:34 pm
- Location: Vancouver BC & Bloomington IN
Re: Full BFM system still going strong
Looks awesome, Preston. I can only imagine how good it must sound. What are the Otops stacked up on?
2xT30 (20", 3012LF)
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
2xT30 (21", 3012LF)
4xOtop J-array (Beta12, melded/straight piezos)
Truck Tuba (MCM)
Next up: 2xJack12 or family of table tubas
Re: Full BFM system still going strong
I bet that sounds great.
AudioFlyer DJ: DR200 & Titan39/Titan48
BASS: Combo Amp & Titan39
BASS: Combo Amp & Titan39
Re: Full BFM system still going strong
I use a small 4 foot tall scaffolding to stack the OT12s. Black bed sheets from Walmart and a couple small spring clamps to dress it up.