horst wrote:That sounds petty good, but you should get some binaural microphones, they are microphones that are mounted in or near the ears, the resulting effect is almost spooky in it's realism.BrentEvans wrote:
Also... event video. Camera audio only,
PS: it does look a little non busy in there, maybe you could suggest they mix up the slow dance material with
some Drum n' Praise? I'd come.
A Second First Date (DR200s with Ribbons)
Re: A Second First Date (DR200s with Ribbons)
Yes! Love me some DJ Die beats.
Re: A Second First Date (DR200s with Ribbons)
Praise da lord!
I sometimes forget how rough Stigma is as a track... Daaaaaaaaaaaamn
I sometimes forget how rough Stigma is as a track... Daaaaaaaaaaaamn
4xOT12s, 2xT39s@22", TTLS@18", 2xT60@18"
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: A Second First Date (DR200s with Ribbons)
The beston is not as good as the dayton. Two in an Beta or 2512 OT12 should keep up about as well as they don in a Beta DR200. They wouldn't keep up with a 3012HO. Biamp only.Rockboy wrote:Dayton Audio PT2C-8 Planar Tweeter
http://www.parts-express.com/pe/showdet ... er=275-085
Beston RT002A Ribbon Tweeter
http://www.parts-express.com/pe/showdet ... er=277-112
Thanks -- Robb !!!!!!!!
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
Re: A Second First Date (DR200s with Ribbons)
Are there any issues with the ribbons not being right close together vertically?BrentEvans wrote: ↑Fri Jun 17, 2011 3:26 pmDayton PT2C-8, 2 per cab in series. Spacing was done so that when stacked, the individual ribbons are equidistant. This means they're cheated slightly to the outside from perfect center on the cab.Jujuman wrote:Hey BE;
Which ribbons did you use? That vid sounds great.....
Jujuman
- BrentEvans
- Posts: 3044
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: A Second First Date (DR200s with Ribbons)
Holy thread resurrection Batman! 6.5 years might be a new record.stduncan wrote: ↑Tue May 07, 2019 8:21 pmAre there any issues with the ribbons not being right close together vertically?BrentEvans wrote: ↑Fri Jun 17, 2011 3:26 pmDayton PT2C-8, 2 per cab in series. Spacing was done so that when stacked, the individual ribbons are equidistant. This means they're cheated slightly to the outside from perfect center on the cab.Jujuman wrote:Hey BE;
Which ribbons did you use? That vid sounds great.....
Jujuman
Theoretically there might be some interactions from the distance, but it wasn’t noticeable as the interaction would be close to the cab and high frequency in nature.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.