Table Tuba and Tuba HT

Comparisons of the different models with each other and commercial cabs.
Locked
Message
Author
User avatar
Bill Fitzmaurice
Site Admin
Posts: 26951
Joined: Tue May 02, 2006 5:59 pm

Table Tuba and Tuba HT

#1 Post by Bill Fitzmaurice » Sun Sep 10, 2006 4:23 pm

The Table Tuba, freestanding, wall and corner placement, loaded with the MCM 55-2421 eight.

Image


Member Frankenspeaker's 2x8 loaded TT, 18.75 inches wide, measured outdoors/groundplane, 5.6 volts/ 2 meters. Chart courtesy B.Gavin.

Image

The same 2x8 TT, 12.2 volts/2 meters. Chart courtesy B.Gavin

Image

The Tuba HT, freestanding, wall and corner placement, 24.5 inches wide, loaded with a Tempest Classic 15.

Image

Tuba HT, 24 inches wide, loaded with the Tempest 15 (blue) and Lab 12 (red) drivers, half-space. Lab 12 is a simulated response, Tempest is measured.

Image

Table Tuba and Tuba HT, both corner loaded.

Image

Tuba HT and Lab Sub, both corner loaded.

Image

Tuba HT and Pi 12, both freestanding. The Pi does go louder, but the THT goes lower.

Image

Locked