Page 8 of 11
Re: Speakerhardware.com
Posted: Thu Oct 14, 2010 3:15 pm
by LelandCrooks
Thanks Jswing.
You're welcome on the Duratex, Doug, but AcryTech deserves the credit. I'd been happily shipping it out, when I pulled three gallons one day. There was quite a weight discrepancy, so I weighed them. 8.5, 9 and 10.2 lbs, supposed to be 9 lbs. I dropped Acrytech a line about QC on the scales when they fill. They pulled some from the batch and discovered it was gelling in the buckets. Everybody who'd bought from me got a new gallon from them, and they replaced my order in 3 days.
Good people, good product.
Re: Speakerhardware.com
Posted: Thu Oct 14, 2010 3:30 pm
by David Carter
LelandCrooks wrote:Good people, good product.
+1. The first time I used Duratex, the results were less than spectacular. After some discussion with one of the Acrytech guys on the phone, I realized that I had not followed the instructions regarding application conditions and procedure very well, so it was my fault. Even though they could have used that against me, they didn't. Instead they sent me a free gallon and one of their textured rollers to help make sure I had a better experience the next time. It worked, and I've rolled Duratex using their roller on every cab I've built since then.
Posted: Wed Oct 27, 2010 11:22 am
by LelandCrooks
1st come 1st served. In stock only.
1 in stock. Crown Xti 4000 $750, with the crown rebate of $200 makes your cost $550. No I won't pay the freight at this price, nor program the dsp. Save over $400
2 in stock Crown Xti 2000 SOLD
http://www.crownaudio.com/rebatefiles/X ... 090110.pdf
Email me at
questions@speakerhardware.com to get these prices.
Re: Speakerhardware.com
Posted: Fri Oct 29, 2010 1:12 pm
by subharmonic
Any new coupons?
Re: Speakerhardware.com
Posted: Sat Dec 18, 2010 9:29 am
by LelandCrooks
Getting out of Amplifiers
Posted: Fri Jan 21, 2011 1:30 pm
by LelandCrooks
Getting out of the amplifier business. Too much money tied up for no profit.
Here's what I have left
Crown XLS2000 2 in stock. $365 each
Crown XLS2500 2 in stock $442 each
Crown Xti 4000 1 in stock $731
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
You have to email me to get these.
questions@speakerhardware.com
Still going to do digmoda, just because I think they're cool.
Re: Getting out of Amplifiers
Posted: Fri Jan 21, 2011 3:47 pm
by el_ingeniero
LelandCrooks wrote:Getting out of the amplifier business. ...
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
If they're not losing money, I probably can't afford it. Their loss is my gain ... you don't want to know what I paid for 2 brand new Xti 2000 amps ...
LelandCrooks wrote:Still going to do digmoda, just because I think they're cool.
So do I. Wish I could afford them. I love the form factor.
Re: Speakerhardware.com
Posted: Tue Feb 22, 2011 1:17 pm
by LelandCrooks
GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.
Re: Speakerhardware.com
Posted: Wed Mar 09, 2011 2:58 pm
by badgerman
LelandCrooks wrote:GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.
And I was just getting ready to finally order some...
Re: Speakerhardware.com
Posted: Wed Mar 16, 2011 12:13 pm
by LelandCrooks
Duratex back in stock. Piezos the first of next week.
Re: Speakerhardware.com
Posted: Mon Mar 21, 2011 12:57 pm
by LelandCrooks
Re: Speakerhardware.com
Posted: Mon Mar 21, 2011 3:01 pm
by DJPhatman
A pint
and a 4" roller for $20 shipped?
HOLY $HIT, Leland! That is just too cheap!
Re: Speakerhardware.com
Posted: Mon Mar 21, 2011 4:38 pm
by doncolga
Should a pint cover two Omnitop 12's?
Thanks!
Donny
Re: Speakerhardware.com
Posted: Mon Mar 21, 2011 5:05 pm
by LelandCrooks
I need to change the description. It's a 3" roller, made for touchups. I hadn't seen them when I posted that. If you're nice to it it will probably do a couple of cabs, but it's not as good a handle as the 4" steel one.
I doubt that a pint will cover 2. 1 probably.
Re: Speakerhardware.com
Posted: Fri Sep 30, 2011 10:14 am
by LelandCrooks
All the neo's except the 3015 are in stock. The 3012 and 3015LF are restricted to kit sales only. The 2510,12,15 and 3012ho's are available for individual sale, at least for a while.