Speakerhardware.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
Thanks Jswing.
You're welcome on the Duratex, Doug, but AcryTech deserves the credit. I'd been happily shipping it out, when I pulled three gallons one day. There was quite a weight discrepancy, so I weighed them. 8.5, 9 and 10.2 lbs, supposed to be 9 lbs. I dropped Acrytech a line about QC on the scales when they fill. They pulled some from the batch and discovered it was gelling in the buckets. Everybody who'd bought from me got a new gallon from them, and they replaced my order in 3 days.
Good people, good product.
You're welcome on the Duratex, Doug, but AcryTech deserves the credit. I'd been happily shipping it out, when I pulled three gallons one day. There was quite a weight discrepancy, so I weighed them. 8.5, 9 and 10.2 lbs, supposed to be 9 lbs. I dropped Acrytech a line about QC on the scales when they fill. They pulled some from the batch and discovered it was gelling in the buckets. Everybody who'd bought from me got a new gallon from them, and they replaced my order in 3 days.
Good people, good product.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- David Carter
- Posts: 1826
- Joined: Mon Jan 01, 2007 7:20 am
- Location: (East) Tennessee, USA
Re: Speakerhardware.com
+1. The first time I used Duratex, the results were less than spectacular. After some discussion with one of the Acrytech guys on the phone, I realized that I had not followed the instructions regarding application conditions and procedure very well, so it was my fault. Even though they could have used that against me, they didn't. Instead they sent me a free gallon and one of their textured rollers to help make sure I had a better experience the next time. It worked, and I've rolled Duratex using their roller on every cab I've built since then.LelandCrooks wrote:Good people, good product.
Dave
Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)
Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
1st come 1st served. In stock only.
1 in stock. Crown Xti 4000 $750, with the crown rebate of $200 makes your cost $550. No I won't pay the freight at this price, nor program the dsp. Save over $400
2 in stock Crown Xti 2000 SOLD
http://www.crownaudio.com/rebatefiles/X ... 090110.pdf
Email me at questions@speakerhardware.com to get these prices.
1 in stock. Crown Xti 4000 $750, with the crown rebate of $200 makes your cost $550. No I won't pay the freight at this price, nor program the dsp. Save over $400
2 in stock Crown Xti 2000 SOLD
http://www.crownaudio.com/rebatefiles/X ... 090110.pdf
Email me at questions@speakerhardware.com to get these prices.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- subharmonic
- Posts: 2061
- Joined: Sun Mar 14, 2010 1:57 pm
- Location: Mandan ND
Re: Speakerhardware.com
Any new coupons?
2x T39, 1x T60, 1x THTLP, 1x AT(not built by me) 6x DR250
I need more bass
But this gal's built like a burlap bag full of bobcats
CW Mcall
I need more bass
But this gal's built like a burlap bag full of bobcats
CW Mcall
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
New Blog is up. http://blog.speakerhardware.com/
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Getting out of Amplifiers
Getting out of the amplifier business. Too much money tied up for no profit.
Here's what I have left
Crown XLS2000 2 in stock. $365 each
Crown XLS2500 2 in stock $442 each
Crown Xti 4000 1 in stock $731
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
You have to email me to get these. questions@speakerhardware.com
Still going to do digmoda, just because I think they're cool.
Here's what I have left
Crown XLS2000 2 in stock. $365 each
Crown XLS2500 2 in stock $442 each
Crown Xti 4000 1 in stock $731
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
You have to email me to get these. questions@speakerhardware.com
Still going to do digmoda, just because I think they're cool.
Last edited by LelandCrooks on Mon Jan 24, 2011 6:07 pm, edited 1 time in total.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
-
- Posts: 932
- Joined: Sun Jul 18, 2010 11:46 pm
- Location: Minneapolis, MN
Re: Getting out of Amplifiers
If they're not losing money, I probably can't afford it. Their loss is my gain ... you don't want to know what I paid for 2 brand new Xti 2000 amps ...LelandCrooks wrote:Getting out of the amplifier business. ...
These are at my cost. It kills me that I see places selling below this. They're used for loss leaders.
So do I. Wish I could afford them. I love the form factor.LelandCrooks wrote:Still going to do digmoda, just because I think they're cool.
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
And I was just getting ready to finally order some...LelandCrooks wrote:GT1016's are out of stock. Goldwood won't have more until the 15th of March. They were supposed to be in last week, and got bumped to the next container.
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
Duratex back in stock. Piezos the first of next week.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
A pint and a 4" roller for $20 shipped?
HOLY $HIT, Leland! That is just too cheap!
HOLY $HIT, Leland! That is just too cheap!
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice
Re: Speakerhardware.com
Should a pint cover two Omnitop 12's?
Thanks!
Donny
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
I need to change the description. It's a 3" roller, made for touchups. I hadn't seen them when I posted that. If you're nice to it it will probably do a couple of cabs, but it's not as good a handle as the 4" steel one.
I doubt that a pint will cover 2. 1 probably.
I doubt that a pint will cover 2. 1 probably.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
All the neo's except the 3015 are in stock. The 3012 and 3015LF are restricted to kit sales only. The 2510,12,15 and 3012ho's are available for individual sale, at least for a while.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com