Speakerhardware.com

For member use only, no commercial ads allowed.
Message
Author
User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#136 Post by LelandCrooks » Thu Dec 05, 2013 12:10 am

My annual holiday sale starts today. Free freight on practically every kit on the site for domestic orders. International orders email me for your discount.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#137 Post by LelandCrooks » Sun Dec 08, 2013 8:48 am

Simplexx kits are up on the site.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#138 Post by LelandCrooks » Tue Feb 18, 2014 10:28 am

Okay the free freight on kits is over. But I've replaced it with something better! Free freight on any order over $200, and substantial discounts on 4 drivers or more, and discounts on kit orders of 3 or more.

If you're buying 3 different kits the site won't figure it. But I will.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#139 Post by LelandCrooks » Thu Feb 27, 2014 9:04 am

After long resisting the idea Tuba and Titan flat packs are now available. Fair warning, you will still have to do some cutting when you assemble these, unless your assembly skills are exacting. Even then some models have modifiable panels that aren't cut to fit until the final assembly.

http://www.speakerhardware.com/products.php?cat=24
http://www.speakerhardware.com/products.php?cat=88
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: Speakerhardware.com

#140 Post by sine143 » Sat Apr 05, 2014 1:51 pm

Hey leland, a couple questions,

are these black?

http://www.speakerhardware.com/12-x6.php

andddd do you have the bolts for speakons available still (I only see the cab screws).
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

NEW IMPROVED!

#141 Post by LelandCrooks » Tue Jun 17, 2014 8:26 am

Deleted
Last edited by LelandCrooks on Tue Sep 30, 2014 6:52 am, edited 1 time in total.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#142 Post by LelandCrooks » Sat Jun 21, 2014 6:39 am

Deleted
Last edited by LelandCrooks on Tue Sep 30, 2014 6:53 am, edited 1 time in total.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#143 Post by LelandCrooks » Thu Sep 18, 2014 10:11 am

Huge bargain available for you SLAH pro builders. I have 24 Faital 6FE100's I need to get rid of. T/S parameters are an excellent match for the specified Alpha 6a, except for a much lower FS. You should get more bass, and the midrange on this driver is stellar. They are used. Not over 6 hours on any one of them. Pulled from some prototype cabinets.


http://www.speakerhardware.com/faital-6fe100.php

Complete specs for the driver
http://www.faitalpro.com/en/products/LF ... =401020100
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

67baja
Posts: 931
Joined: Sat Dec 11, 2010 12:10 am
Location: Las Vegas, NV

Re: Speakerhardware.com

#144 Post by 67baja » Thu Sep 18, 2014 6:18 pm

Pm sent
2 THTs, 2 TLAH, SLA curved, 1 8-AT, 1 AT JBL 1002D, 4 Otop12s, Jack 12, TT with Eminence 10", 2 SLAs, 1 T30 slim, 2 T30s (2-10" each), SLA Pros, TrT.

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#145 Post by LelandCrooks » Wed Sep 24, 2014 6:37 am

Shipping for small parts will be closed sept 30th through October 7. Flat packs and eminence will still be shipping. Sam will do the flat packs, I can drop ship eminence. I'm taking a holiday. For christmas last year my daughter bought me 10 laps at a racetrack in a stock car. Hell yeah! The kicker was I have to go to Seattle to visit her to use them. Sneaky girl.

If you've got an order in now it will go out before I leave.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
Tom Smit
Posts: 7154
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Speakerhardware.com

#146 Post by Tom Smit » Wed Sep 24, 2014 10:33 am

ENJOY. Leland!
TomS

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#147 Post by LelandCrooks » Mon Dec 01, 2014 8:09 am

Remind your loved ones gift certificates are available from Speakerhardware.
http://www.speakerhardware.com/gift-cards.php
And we build cabs too, not just parts and packs.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#148 Post by LelandCrooks » Sat Mar 14, 2015 7:33 pm

Subwoofer flat packs are back. Finally. T24,T39. and T48. T60, THT and TT are on the way.

Much more in CNC cut parts are on the drawing board. I'll be rolling them out over the next month or two.

https://www.facebook.com/video.php?v=627101184057514
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#149 Post by LelandCrooks » Sat Apr 11, 2015 4:37 pm

Goldwood 1016's are back in stock. Finally. :cussing:

Duratex will be back in stock about 4-17. Goes on the truck tuesday
I will have white in quarts. :hyper:
I will have deep tint in quarts :hyper:
I will still have pints of black, but a special price for 2 to make a quart.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

User avatar
LelandCrooks
Posts: 7241
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Braces!

#150 Post by LelandCrooks » Fri May 15, 2015 8:20 am

The single most pesky part of the subs is getting the braces right. We've got the answer. CNC precut brace kits for T39 and T48. This is a huge timesaver, plus you can't get that pretty cutout by hand. Kits for more models coming soon.

http://www.speakerhardware.com/t39-cnc-brace-kit.php
http://www.speakerhardware.com/t48-cnc-brace-kit.php
Image
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

Post Reply