BillFitzmaurice.info

http://www.speakerhardware.com

Stuff used in building BFM cabs. Some of the unique hdwe required. The site is evolving, products and ordering.


Buncha new stuff as of 10-29-07. Reflectors, new kits, new parts.

Christian wrote:I would gladly pay an extra dollar per tweet for a little consistency.

Sounds like a simple music test is all I need. I had no idea the response varied so much. Wish I had tested all my other arrays....ah well.

thanks.

Been thinking about doing just this for a while. Found some decent software, so here you go.
Now on the site, tested, SPL matched as closely as possible.
http://www.speakerhardware.com/proddeta ... prod=Piezo

Duratex is on the way. Should be in stock the by the 28th of Nov. Will be on the site available to order sometime today, Nov 20th.

Roller grade $49.50 gallon
Spray Grade $49.50 gallon
HiBuild $55.95 gallon.

In 5's $1 less per gallon.

Prices are the same as Acrytech. Freight will be way less from me, (unless you're closer to them) especially if I can ship to a business address.

This particular model would have been nice if I would have known about it before building my DR280s:

http://www.usspeaker.com/sh-tophat-ch-1.htm

These would rock for any DR cabinet that was going to have a pole mount, and much easier than the router trick shown in the plans for a regular top hat.

JazzyRick wrote:This particular model would have been nice if I would have known about it before building my DR280s:

http://www.usspeaker.com/sh-tophat-ch-1.htm

These would rock for any DR cabinet that was going to have a pole mount, and much easier than the router trick shown in the plans for a regular top hat.

Been looking for those. Haven't found the wholesaler yet. I want some too.

Check it out. New features
Live Support, If I'm on, you can talk to me directly.
What's new, showing new additions to the site.
Freight estimator, gets in the ballpark, always a little low, don't know why.

Duratex is ranging from $6-8 per gallon to ship, depending on where. Ignore the shipping calculator, I will send a revised price with the shipping cost. It's usually lower than the calculator. UPS only.

Also Rate and Review. Not displaying right yet, but you can still leave reviews. And please do, good or bad.

Suggestion: Shipping to Mexico!!!!!

Done. You should be able to get freight quotes to Mexico from the site. USPS will be the best way.

As of yesterday I am a Eminence Distributor. Not just a dealer, a national distributor. (No guts no glory) I will have, by the middle of next week, virtually every driver Eminence makes in stock, in quantity. My website is undergoing a huge overhaul over the next week or so, so bear with me.

If you're an eminence dealer, buying direct, try me if I'm physically closer to you. Freight savings, same prices on drivers. They were looking for a midwest distributor for that reason. I have nationally negotiated freight rates with Fedex and Roadway. Significant savings on freight. There'll be deals for dealers once I get the kinks worked out.

When I get the site done there will be more announcements. BFM builders will get some special breaks.

XF kits are up. Just the basics. Too many variables in guitar cabs. Every eminence guitar driver available and in stock.

They're also on introductory SALE.

Put in coupon code XF2X at checkout. Limited quantities of coupons available.

3012lfs and HO's the middle of Feb. I should have them available to ship by the third week or so. Lots more new toys coming to SpeakerHardware very soon.

Any idea on price difference for the 3012lf compared to the 3015lf? Is the ratio the same for wholesale pricing?

http://www.speakerhardware.com/kappalit ... 3012LF.php

Wholesale prices are on the site. Retail is yet to be determined. What's shown is the minimum advertised price.

Completely rebuilt internals on the site. New better pricing on many kits, reorganized so stuff is logical and easier to find, descriptions that are less random, pricing that makes sense. Thanks to all of you my nice little side business had gotten to the point it had to get real. Please take a look, you guys are my best proofreaders.

Cool deal. Have you considered offering deluxue kits for 2 or more of the same speaker? I'm planning on building dr250s soon and it would be cool to buy things like the glues and such in larger bulks to save a bit over the smaller sizes that seem to be in the dlx kits.