Speakerhardware.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
That is nice, your business is extending beyond DIY hardware, congrats
Do you happen to know if the upcoming Drivecore amps will run on anything between 100V-240V and 50/60 Hz just like the XTi range? Looks like all of these exciting new affordable lightweight amps take their time arriving in European stores, so it might make sense getting one shipped from the US if it would run on local voltage.
Do you happen to know if the upcoming Drivecore amps will run on anything between 100V-240V and 50/60 Hz just like the XTi range? Looks like all of these exciting new affordable lightweight amps take their time arriving in European stores, so it might make sense getting one shipped from the US if it would run on local voltage.
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
Pretty sure they will. I have specs somewhere from Namm, I'll see if I can find them.
Lots of big things coming pretty soon, to make it all easier. I'm slowly putting the pieces of the puzzle together.
Lots of big things coming pretty soon, to make it all easier. I'm slowly putting the pieces of the puzzle together.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
Nice, I should've had you throw a couple of those in with the 42 1016s and crossover parts you just sent me.
Re: Speakerhardware.com
Nice, carrying XTis now!
I so want to get started on my new T39s, but I'm booked every Saturday (and possibly every Friday soon) until August! Or maybe
I so want to get started on my new T39s, but I'm booked every Saturday (and possibly every Friday soon) until August! Or maybe
Bobby Shively
Purveyor of fine aged hip hop
Traktor S4 - Vestax VCI-100 - TTX - MOTU Ultralite - Yamaha 01V
Built:
T39 13" BP102, 24" 3012LF - AT - OT12 2512 - SLA Pro - T24 - Jack 10
Powered by XTi 1000 & 2000
Purveyor of fine aged hip hop
Traktor S4 - Vestax VCI-100 - TTX - MOTU Ultralite - Yamaha 01V
Built:
T39 13" BP102, 24" 3012LF - AT - OT12 2512 - SLA Pro - T24 - Jack 10
Powered by XTi 1000 & 2000
- Drey Chennells
- Posts: 1377
- Joined: Sun May 17, 2009 10:12 pm
- Location: Central FL ~Authorized Builder
- Contact:
Re: Speakerhardware.com
Very interested in the DriveCore amps... keep us posted!
"Things happen, but music stays in your blood forever~." bf
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
InfraCoustik
Consulting/Design/Fabrication
Authorized BF Builder
http://www.infracoustik.com/
info@infracoustik.com
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
New stuff.
http://www.speakerhardware.com/categories.php?cat=128
I especially like these. http://www.speakerhardware.com/products.php?cat=130
They custom built the 1150 for me. My system has gone self powered. Pics pretty soon.
http://www.speakerhardware.com/categories.php?cat=128
I especially like these. http://www.speakerhardware.com/products.php?cat=130
They custom built the 1150 for me. My system has gone self powered. Pics pretty soon.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
Oh Snap.... wow. that gives me something to think about.
I was eying your kits that were coupled with the xti's, but this is interesting as well
Side note:
you wouldn't mind sharing your settings for the xtis would you? If not, I understand, cause that's a definite point of attraction for the new guys looking to get into a plug and play situation.
I was eying your kits that were coupled with the xti's, but this is interesting as well
Side note:
you wouldn't mind sharing your settings for the xtis would you? If not, I understand, cause that's a definite point of attraction for the new guys looking to get into a plug and play situation.
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
The base curve is from the spl charts inverted. Then I apply my own tweaks, which I ain't sharing.
NEW. I dropped my cable prices through the floor. 50ft pro grade xlr for under $30 for example.
http://www.speakerhardware.com/products.php?cat=124
NEW. I dropped my cable prices through the floor. 50ft pro grade xlr for under $30 for example.
http://www.speakerhardware.com/products.php?cat=124
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
- Dave Non-Zero
- Posts: 1939
- Joined: Thu Jul 13, 2006 4:59 am
- Location: Dundee, Scotland
- Contact:
Re: Speakerhardware.com
Those are some sweet kits! Nice.
-1 for thought terminating cliches.
Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60
In Progress:
2 x DR280
Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60
In Progress:
2 x DR280
Re: Speakerhardware.com
Leland, although I've already realized this, you should tell everyone that the 3012lf is back in stock!
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
Crown XLS1000 is now in stock. http://www.speakerhardware.com/xls_1000 ... LS1000.php
New lower prices on the subwoofer and complete system packages. http://www.speakerhardware.com/products.php?cat=129
New lower prices on the subwoofer and complete system packages. http://www.speakerhardware.com/products.php?cat=129
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com
Re: Speakerhardware.com
Do you have more detailed info on the xls crossover capabilities? Can you put both a lopass AND a hipass on 1 channel (to run... say, subwoofers?)
JBL users dont know what they are missing with your powered kits.
JBL users dont know what they are missing with your powered kits.
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208
2x OT212 (delta pro 450a loaded, eminence psd)
Re: Speakerhardware.com
From the info on the Crown website it seems it does either HP or LP per channel, not both (no bandpass).
http://www.crownaudio.com/pdf/amps/XLS_ ... CRO137.pdf
http://www.crownaudio.com/pdf/amps/1421 ... 032410.pdf
Although I cannot find mention of it, there could be a default HP filter. But if so it would probably be set lower than most would need for pro sub operation. If not some purists probably find a reason to bash Crown for building an amp that "does not perform" at subsonic frequencies.
http://www.crownaudio.com/pdf/amps/XLS_ ... CRO137.pdf
http://www.crownaudio.com/pdf/amps/1421 ... 032410.pdf
Although I cannot find mention of it, there could be a default HP filter. But if so it would probably be set lower than most would need for pro sub operation. If not some purists probably find a reason to bash Crown for building an amp that "does not perform" at subsonic frequencies.
- LelandCrooks
- Posts: 7244
- Joined: Thu May 04, 2006 9:36 am
- Location: Midwest/Kansas/Speaker Nirvana
- Contact:
Re: Speakerhardware.com
I need to move some drivers. Almost all the guitar stuff on the site is on sale. If you use something besides bfm cabs and need some drivers drop me a line. Bargains to be had, especially on Pro Series 15's and 18's, American Standard 15's and 18's. I can't put up prices because of MAP.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
http://www.speakerhardware.com