Speakerhardware.com

For member use only, no commercial ads allowed.
Message
Author
User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Speakerhardware.com

#151 Post by DJPhatman »

Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#152 Post by LelandCrooks »

That would be a custom, and dependent on the availability of 3/8. I expect we'd have up charge for the full sheet needed, I don't know about the extra coding. If it's for weight, these are really light with the cutouts.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

ncgrove
Posts: 457
Joined: Wed Jul 06, 2011 7:38 pm
Location: Colorado Springs, CO

Re: Speakerhardware.com

#153 Post by ncgrove »

DJPhatman wrote:Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?
Just glue a strip of 1/8 BB to an edge of the brace and you'll be set.

User avatar
DJPhatman
Posts: 5412
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: Speakerhardware.com

#154 Post by DJPhatman »

ncgrove wrote:
DJPhatman wrote:Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?
Just glue a strip of 1/8 BB to an edge of the brace and you'll be set.
Are they 1/4"?
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
LelandCrooks
Posts: 7244
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:

Re: Speakerhardware.com

#155 Post by LelandCrooks »

1/2
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com

Post Reply