Six DR200s and Six T45s

For member use only, no commercial ads allowed.
Post Reply
Message
Author
User avatar
J_Dunavin
Posts: 1061
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Six DR200s and Six T45s

#1 Post by J_Dunavin » Mon Jul 27, 2020 2:22 am

Edit, Edit
$2000 takes the lot minus two DRs.

I absolutely love my system and it sounds unbelievably great, but i really need to downsize.
Here is a link to the Google photo album as i took at least two pictures of every cabinet:

https://photos.app.goo.gl/EdrcEuo9pS9RRBbx6

Some quick notes:
-Two of the DRs have melded arrays, the other four are straight arrays. The two with melded arrays are the ones with top hats.
-Two of the DRs do not have an access door. I found that the Beta 8 driver, which all of these are, actually fits through the front, if you take off the array. WHICH i should also note that all of these are of the previous design rev. the newer DRs whole front section comes off, these do not, just the array can unscrew.
-None of the DRs have passive crossovers in them, i have them set up to bi amp at the moment, but wouldn't be difficult to mount a passive crossover inside....
-I took one close up of the jack plate, which is just 1/16 inch plastic that i had a buddy cut out the speakon connectors for me. They work just fine, all of the cabinets have those.
-All of the DRs have a foam liner on the inside, per the plans.
-All of the T45s are loaded with the Kappalite 3012lf
-You will notice that back panel on all the T45s are unfinished. My plan was to flush cut / sand it all down, add a doubler and some casters back there.
-Four T45s are 24 wide, two of them are 18" wide. (those two have the unpainted horn throat)
-Everything was painted with just Menards black water based paint.
-Everything has been run off of a DBX PA2, limited and high passed.

Would prefer to sell as a whole set, but will entertain splitting it apart.
Located in Appleton WI, i can drive a little ways out to help with transportation and delivery. If your close by, i would be more than happy to demo the system (to serious buyers of course)
I'm also including the stacking plates and hardware to tie the DRs together, some extra grill material, and some extra bendy ply (would be enough for one DR)

Oh and it all fits in a 4x8 enclosed trailer 😁
Asking $350 per T45 and $250 per DR
Last edited by J_Dunavin on Fri Sep 18, 2020 12:10 am, edited 5 times in total.
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
J_Dunavin
Posts: 1061
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: Six DR200s and Six T45s

#2 Post by J_Dunavin » Tue Jul 28, 2020 10:33 am

Adding my Peavey IPS amps, and diy enclosures, to the pile.
One Peavey IPS 800
Two Peavey IPS 400s
One Peavey IPS 150

$100 each
Attachments
5170A1D7-D2D0-4496-AABE-854ED237FFED.jpeg
B4D48F01-B172-41F6-83CC-3C217A27C766.jpeg
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

raginbajan
Posts: 8
Joined: Sat Mar 09, 2013 7:32 pm
Location: Devonshire, Bermuda

Re: Six DR200s and Six T45s

#3 Post by raginbajan » Sat Aug 01, 2020 7:01 am

Would love to get my hands on a couple of those DRs but my shipper is all the way in NJ.
Built 2 x T60 27" Wide
To Build, 4 x OT 12s, 2 x Titan 48

User avatar
J_Dunavin
Posts: 1061
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: Six DR200s and Six T45s

#4 Post by J_Dunavin » Mon Sep 14, 2020 6:19 pm

Two DRs sold
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
J_Dunavin
Posts: 1061
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: Six DR200s and Six T45s

#5 Post by J_Dunavin » Fri Sep 18, 2020 12:10 am

2000 for the four DRs and six T45s
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
J_Dunavin
Posts: 1061
Joined: Sun Jul 09, 2006 3:13 pm
Location: Appleton WI
Contact:

Re: Six DR200s and Six T45s

#6 Post by J_Dunavin » Wed Sep 30, 2020 1:03 am

Make me an offer, would like to see it gone before the snow flys.
8 - DR200
2 - DR250
9 - T24
6 - T45
1 - Auto Tuba

User avatar
Bryan Cox
Posts: 323
Joined: Sun Nov 22, 2015 3:01 pm
Location: Minot AFB, ND

Re: Six DR200s and Six T45s

#7 Post by Bryan Cox » Wed Sep 30, 2020 9:33 pm

Oh man, had I seen this before I left Minot I'd have jumped on it!!! Sweet deal.
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide

Post Reply