4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

For member use only, no commercial ads allowed.
Message
Author
User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#1 Post by DJ Higgumz » Fri Nov 10, 2017 6:50 pm

$1400 - 4 Dual T60s, 1 is loaded and primed, other 3 sit ready for paint, speakers and hardware. I do have corner hardware for these, and the jacks (speakon and ts combo) pre wired to be installed. just never got to finishing them. I may have the casters as well, not sure. Picture shows some of them incomplete, they are currently completely constructed.
$400 - 2 T60s 19" wide fair amount of road rash but with a brush and some duratex you will have em looking good. these have 1/4 jacks only front and rear.
$500 - 6 DR200 flat packs, comes with most of the wood panels needed minus the larger panels for the sides and the front flare. The throat assembly is completed.

Located in West Bend, WI 53090 near Milwaukee. Will travel to meet or drop off if a reasonable distance. I am getting out of the business.

Image
Image

Edit- Price drops and removed items sold
Last edited by DJ Higgumz on Wed Jan 10, 2018 1:45 pm, edited 2 times in total.
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

User avatar
DJPhatman
Posts: 5394
Joined: Mon Aug 14, 2006 5:08 am
Location: Warren, MI
Contact:

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#2 Post by DJPhatman » Sat Nov 11, 2017 3:52 pm

DJ Higgumz wrote:I am getting out of the business.
I am very saddened by this news. GLWYS!
I know money often seals the deal, but seriously, quality is an investment, not an expense... Grant Bunter
Accept the fact that airtight and well-braced are more important than pretty on the inside. Bill Fitzmaurice

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#3 Post by DJ Higgumz » Mon Nov 13, 2017 6:10 pm

I"ve developed a more profitable business venture
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

Rich4349
Posts: 591
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#4 Post by Rich4349 » Tue Nov 14, 2017 12:29 pm

What drivers are the 19" T60s loaded with?
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

User avatar
DJStubbs
Posts: 124
Joined: Tue Oct 04, 2016 3:51 pm

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#5 Post by DJStubbs » Fri Nov 17, 2017 5:57 pm

Sorry how much for the dual lab12 t60s? And how many do you have 2?
And how did you mount the clamps to the 250s? thats interesting.
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#6 Post by DJ Higgumz » Sun Nov 19, 2017 9:53 pm

DJStubbs wrote:Sorry how much for the dual lab12 t60s? And how many do you have 2?
And how did you mount the clamps to the 250s? thats interesting.
$1800 for all 4, looks like I didnt list what that was for. and its just a set of lighting clamps through the wood with fender washers on the other side
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

PrismAudio
Posts: 21
Joined: Fri Mar 25, 2016 11:12 am

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#7 Post by PrismAudio » Sun Nov 19, 2017 11:19 pm

1800 for the T60s, does that come with all the drivers as well?
My Current Rig:

4 - Omni 12
6 - 2x12 Tuba 60s

DBX Venu360
Behringer XR18
3 x QSC PL236
1 x QSC PL325
1 X QSC PLX2502

User avatar
DJStubbs
Posts: 124
Joined: Tue Oct 04, 2016 3:51 pm

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#8 Post by DJStubbs » Mon Nov 20, 2017 11:44 pm

DJ Higgumz wrote:
DJStubbs wrote:Sorry how much for the dual lab12 t60s? And how many do you have 2?
And how did you mount the clamps to the 250s? thats interesting.
$1800 for all 4, looks like I didnt list what that was for. and its just a set of lighting clamps through the wood with fender washers on the other side


Damn do I wish I would have seen this months ago. I just bought 4 new.
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/

User avatar
DJStubbs
Posts: 124
Joined: Tue Oct 04, 2016 3:51 pm

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#9 Post by DJStubbs » Tue Nov 21, 2017 3:08 pm

DJ Higgumz wrote:
DJStubbs wrote:Sorry how much for the dual lab12 t60s? And how many do you have 2?
And how did you mount the clamps to the 250s? thats interesting.
$1800 for all 4, looks like I didnt list what that was for. and its just a set of lighting clamps through the wood with fender washers on the other side
How much to ship or deliver to southern California
10x Tuba 60 - Dual 12" LAB
5x DR280 - Melded 22 piezo array
2x Crest Audio 5.0
1x Peavey IPR2 3000

https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/

Rich4349
Posts: 591
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#10 Post by Rich4349 » Wed Nov 22, 2017 12:53 pm

And what drivers are in the 19" T60s?
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#11 Post by DJ Higgumz » Thu Nov 23, 2017 7:10 pm

PrismAudio wrote:1800 for the T60s, does that come with all the drivers as well?
the price is structured as $400 per cabinet and $200 for the drivers in the one that i was running for a bit when the slims werent enough.
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#12 Post by DJ Higgumz » Thu Nov 23, 2017 7:13 pm

DJStubbs wrote:
How much to ship or deliver to southern California
id guess around the same as the price, feel free to calculate it out, zip is 53090 and they weigh maybe 80 lbs
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#13 Post by DJ Higgumz » Thu Nov 23, 2017 7:14 pm

Rich4349 wrote:And what drivers are in the 19" T60s?
only ones that fit, the lab 12s
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#14 Post by DJ Higgumz » Thu Dec 28, 2017 11:45 am

Price Drop
$300 for dr250s
$1400 for 4 t60s
$400 for 2 19" slim t60s
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

User avatar
DJ Higgumz
Posts: 801
Joined: Mon Aug 01, 2011 9:13 pm
Location: Wisconsin

Re: 2 DR250s, 4 Unloaded Dual T60s, 2 Single T60s, and 6 DR200 first gen flat packs

#15 Post by DJ Higgumz » Fri Jan 05, 2018 5:02 pm

DR250s sold
Before Fitzmaurice, big bass could only be had with just a hook and a nightcrawler.
Building
4 30" T60s
Built
2 19" T60s
1 30" T39
3 Autotubas with GTO804
Bought
2 Dr250s

Post Reply