there is a mistake in the tuba 60 plans
there is a mistake in the tuba 60 plans
on thr page 4 on the diagram i have two same parameters 9 3/4 is there two times and there should be another number because it is not straight on the image
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: there is a mistake in the tuba 60 plans
There is no mistake. The measurements were taken directly on the sketchup model. Measure your own sketchup and you'll see.
Re: there is a mistake in the tuba 60 plans
I assume you're talking about the lower right corner of Layout Diagram 1 on page 4 and Layout Diagram 2 on page 5...
Here's how those two 9¾" dimensions coincide with each other, each is indicated with a red circle
Here's how those two 9¾" dimensions coincide with each other, each is indicated with a red circle
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421