Pro-Sound Tuba and Titan Virtual Showroom

Get the lowdown on the down low.
Post Reply
Message
Author
User avatar
Seth
Posts: 2730
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Pro-Sound Tuba and Titan Virtual Showroom

#1 Post by Seth »

A perspective on the size and design differences between the T18, T24, T30, T45, T60, T48, T39... All max width except the T60 is 30" wide (where a full width 2x12 T60 would be 39" wide)

The lovely models are roughly 5'2"/157cm tall.

Screenshot (62).png


T18, T24, T30, T45, T60
Screenshot (65).png


Screenshot (61).png


T60, T48, T39
Screenshot (67).png


T60, T48, T39
Screenshot (66).png


Screenshot (63).png


Screenshot (64).png


Screenshot (69).png


Screenshot (70).png


Screenshot (60).png
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Bryan Cox
Posts: 450
Joined: Sun Nov 22, 2015 3:01 pm
Location: Owensville, Mo

Re: Pro-Sound Tuba and Titan Virtual Showroom

#2 Post by Bryan Cox »

That's pretty cool, Seth. Thank you!
Otop 12 x 4 (Delta Pro 12-450a) 2x melded, 2x straight
Titan 39 x 4 (3012LF) 20" wide

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Pro-Sound Tuba and Titan Virtual Showroom

#3 Post by Bruce Weldy »

Seth's favorite song.....


styx.jpg
styx.jpg (15.75 KiB) Viewed 2526 times

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: Pro-Sound Tuba and Titan Virtual Showroom

#4 Post by Bill Fitzmaurice »

:lol:

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: Pro-Sound Tuba and Titan Virtual Showroom

#5 Post by T_Gowan »

That is cool, makes me want to build the flattened version with the speaker chamber on the end.
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

User avatar
Seth
Posts: 2730
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Pro-Sound Tuba and Titan Virtual Showroom

#6 Post by Seth »

Bruce Weldy wrote: Thu Dec 03, 2020 7:50 am Seth's favorite song.....


Image
Bill Fitzmaurice wrote: Thu Dec 03, 2020 8:29 am:lol:
Oh, you guys are soooooo funny.

It's so true though. :noob:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Seth
Posts: 2730
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Pro-Sound Tuba and Titan Virtual Showroom

#7 Post by Seth »

T_Gowan wrote: Thu Dec 03, 2020 10:53 am That is cool, makes me want to build the flattened version with the speaker chamber on the end.
Right between your living room rafters :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

T_Gowan
Posts: 164
Joined: Sun Sep 09, 2007 7:10 pm
Location: Allenford, Ontario, Canada

Re: Pro-Sound Tuba and Titan Virtual Showroom

#8 Post by T_Gowan »

:lol:
DR200 x2
T24 16" x2
T39 20" x2
DCX2496
DEQ2496 x2
FBQ2496
Mackie DL1608

Bruce Weldy
Posts: 8301
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Pro-Sound Tuba and Titan Virtual Showroom

#9 Post by Bruce Weldy »

SethRocksYou wrote: Thu Dec 03, 2020 10:54 pm
Bruce Weldy wrote: Thu Dec 03, 2020 7:50 am Seth's favorite song.....


Image
Bill Fitzmaurice wrote: Thu Dec 03, 2020 8:29 am:lol:
Oh, you guys are soooooo funny.

It's so true though. :noob:
Hey, I wish I was young and had your energy and drive, but this me.....


download (5).jpg
download (5).jpg (11.42 KiB) Viewed 2464 times


and this is you.....


download (1).png
download (1).png (8.29 KiB) Viewed 2464 times

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

CarterKraft
Posts: 255
Joined: Thu Oct 22, 2020 1:46 pm
Location: DFW

Re: Pro-Sound Tuba and Titan Virtual Showroom

#10 Post by CarterKraft »

That is pretty cool though.
Weldon Carter

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Pro-Sound Tuba and Titan Virtual Showroom

#11 Post by Fastskiguy »

Any chance the table tuba and tht could make the lineup someday?

Joe

User avatar
Seth
Posts: 2730
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Pro-Sound Tuba and Titan Virtual Showroom

#12 Post by Seth »

Possible. Not likely.

It's easy enough to put the cabs in line, but unfoldimg them took some time and inspiration. Time I have, but the inspiration for unfolding them has come and gone.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Pro-Sound Tuba and Titan Virtual Showroom

#13 Post by Fastskiguy »

Well you can’t do it without inspiration, I appreciate what we’ve got :)

joblow88
Posts: 68
Joined: Sun Feb 13, 2022 8:18 pm

Re: Pro-Sound Tuba and Titan Virtual Showroom

#14 Post by joblow88 »

Pretty cool!! Thx a lot.
it's definitely a cool perspective

Post Reply