How do i cut the angles in plywood for the tuba 60????
Some tricks or tips?
need help with cutting the angles
- Bill Fitzmaurice
- Site Admin
- Posts: 28646
- Joined: Tue May 02, 2006 5:59 pm
Re: need help with cutting the angles
Follow the plans. For instance, 'Cut and install panel 2. If you don’t have a saw capable of cutting at 54 degrees cut that end at 45 degrees, and sand the excess off'.
Re: need help with cutting the angles
Not knowing how familiar you are with the tools them selves, just thought I'd mention that a circular saw has an adjustable foot to make the cuts Bill mentioned above.
If you're very new to using these tools, watch a bunch of YouTubes to learn about features, techniques, and most importantly... safety.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421