need help with cutting the angles

Get the lowdown on the down low.
Post Reply
Message
Author
holzboss
Posts: 25
Joined: Sat Feb 08, 2020 5:25 am

need help with cutting the angles

#1 Post by holzboss »

How do i cut the angles in plywood for the tuba 60????
Some tricks or tips?

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28619
Joined: Tue May 02, 2006 5:59 pm

Re: need help with cutting the angles

#2 Post by Bill Fitzmaurice »

Follow the plans. For instance, 'Cut and install panel 2. If you don’t have a saw capable of cutting at 54 degrees cut that end at 45 degrees, and sand the excess off'.

User avatar
Seth
Posts: 2731
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: need help with cutting the angles

#3 Post by Seth »

holzboss wrote: Fri Oct 16, 2020 8:37 am How do i cut the angles in plywood for the tuba 60????
Some tricks or tips?
Not knowing how familiar you are with the tools them selves, just thought I'd mention that a circular saw has an adjustable foot to make the cuts Bill mentioned above.

If you're very new to using these tools, watch a bunch of YouTubes to learn about features, techniques, and most importantly... safety.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply