sife of hole for lab 15

Get the lowdown on the down low.
Post Reply
Message
Author
holzboss
Posts: 25
Joined: Sat Feb 08, 2020 5:25 am

sife of hole for lab 15

#1 Post by holzboss »

Please what is the size of the hole i should make in tuba 60 for the speaker??

User avatar
Seth
Posts: 2733
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: sife of hole for lab 15

#2 Post by Seth »

According to the Lab 15 Spec Sheet, 14"/355.6mm. However, it's been recommended more than once to have the driver in hand and verify the measurement before making those cuts.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply