hi all
Would my Titan 39 (narrow) meet a turbosound TSE111 or would there be a hole?
cheers
Titan 39 and other midTop
Titan 39 and other midTop
2off Tuba24(sold now)
2off DR200 with compression drivers
2off Titan39
2off Jack10 (sold now)
2off DR200 with compression drivers
2off Titan39
2off Jack10 (sold now)
Re: Titan 39 and other midTop
In testing, I've crossed my T39 (16") at 200Hz and it sounded great. It might take a little fiddling with EQ and crossover points to get it to sound the way you want, but there shouldn't be any holes... and crossing over at 200 isn't ideal. But, if you have to, you have to.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: Titan 39 and other midTop
The problem with crossing that high, with any sub, is that the sub is running in the directionally locatable frequencies. That totally messes up the sub placement options. I'd make do for now but get rid of the Turbosound ASAP.
Re: Titan 39 and other midTop
Hi bill
Thank you for the swift response.
That was my thought too
However, if I put the tse111 on top of the titans, and paid attention to the distance between the cabs, all would be good? Or would there still be other issues I’ve not thought of?
Thank you for the swift response.
That was my thought too
However, if I put the tse111 on top of the titans, and paid attention to the distance between the cabs, all would be good? Or would there still be other issues I’ve not thought of?
2off Tuba24(sold now)
2off DR200 with compression drivers
2off Titan39
2off Jack10 (sold now)
2off DR200 with compression drivers
2off Titan39
2off Jack10 (sold now)
- Bill Fitzmaurice
- Site Admin
- Posts: 28645
- Joined: Tue May 02, 2006 5:59 pm
Re: Titan 39 and other midTop
If you put the TSE111 atop the T39s that not only makes it next to impossible to wall or corner load the T39s, it also introduces the possibility of boundary reflection sourced low frequency cancellations due to having the subs too far away from the rear walls.