Hi!, how are you people. I have finished the build, the only remaing tasks is to load the cabinets, put the speakon connectors, some cab corners, and perhaps add a grill. When its all done, I will post some measurements, I will compare with the old BR cabs i'd made for the LAB15 (med size vented club sub https://www.eminence.com/pdf/LAB_15_cab.pdf).
I attach some pictures.
Best regards!
T60 Build, almost done
-
- Posts: 112
- Joined: Wed Apr 04, 2012 1:30 pm
- Location: Topeka, Kansas
Re: T60 Build, almost done
Looks great! Nice work.
Re: T60 Build, almost done
Thank you Dale!, can't wait to fire them up and shake some bodies
Re: T60 Build, almost done
Here's some music to let those beasts do some justice to...
https://www.youtube.com/c/Siryn/videos
https://www.youtube.com/channel/UCkt2uC ... pCQ/videos
https://www.youtube.com/c/Siryn/videos
https://www.youtube.com/channel/UCkt2uC ... pCQ/videos
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Re: T60 Build, almost done
Thanks, I will try them soonSethRocksYou wrote: ↑Thu Aug 27, 2020 9:04 am Here's some music to let those beasts do some justice to...
https://www.youtube.com/c/Siryn/videos
https://www.youtube.com/channel/UCkt2uC ... pCQ/videos
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: T60 Build, almost done
Nice!
What will you be using to as a limiter?
What will you be using to as a limiter?
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: T60 Build, almost done
Thank you!. Now I have an Ashly Protea 4.8, but I was going to use a plate amplifier with dsp. With shipping overseas expensive, perhaps I will buy a 4 CH class d amp with dsp (Powersoft Clone), soon I have to decide.
-
- Posts: 6915
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: T60 Build, almost done
Let us know what you’re going to do...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: T60 Build, almost done
I'd recommend using the Ashly for your signal processing and forgo any dsp in an amp. When viewed on a PC, the Protea software is super easy to use and the limiter is very effective. Although, as is the case with any limiter, it needs to be set up properly to work properly. If you're not absolutely sure how to do it, search the forum here, or as Grant mentioned... just ask.
Can't wait to hear your review!
Can't wait to hear your review!
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421