Settings recommendations?

Get the lowdown on the down low.
Post Reply
Message
Author
User avatar
DJStubbs
Posts: 162
Joined: Tue Oct 04, 2016 3:51 pm

Settings recommendations?

#1 Post by DJStubbs » Wed May 02, 2018 11:04 pm

Does it matter which you use lr or bw? And what slope?

Thanks!
18x Tuba 60 - Dual 12" LAB
4x Renkus Heinz ST6
5x DR280 - Melded 22 piezo array
1x Lab Gruppen PLM10000Q
2x QSC PLD4.5
2x QSC PLD4.3


https://ibb.co/e0Uazv
https://ibb.co/bUxmJQ

Klarity Audio & Lighting
https://www.facebook.com/KlarityAudio/

User avatar
Strange Kevin
Posts: 26
Joined: Fri May 19, 2017 3:02 pm
Location: Scottsdale AZ

Re: Settings recommendations?

#2 Post by Strange Kevin » Thu May 03, 2018 12:54 am

Short answer, use what you got. Steepest slope available.

Personally, when high passing and crossing over the subs to the tops I prefer a Linkwitz-Riley with at least a 24dB per octave slope.

Also, if you are curious, hear's what RANE has to say on the subject. http://www.rane.com/note160.html
Authorized Builder - Phoenix AZ.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.

Post Reply