Search found 5925 matches
- Wed Apr 03, 2024 4:51 pm
- Forum: SLA PRO/ TLAH PRO
- Topic: Best rp600m replacement?
- Replies: 8
- Views: 392
Re: Best rp600m replacement?
It's not so much about louder as it is sound quality. SLA Pro isn't hi-fi, it's not supposed to be. It's a lot better than the average woofer/horn plastic PA cab, but it's not what I'd want for home theater.
- Wed Apr 03, 2024 12:20 pm
- Forum: Tuba and Titan Pro-Sound Subwoofers
- Topic: Are 24 x T60-LAB15s Enough? ;)
- Replies: 77
- Views: 2990
Re: Are 24 x T60-LAB15s Enough? ;)
DuraTex is no johnny-come-lately. I started using it after seeing it was used by Carvin on their pro-sound cabinets, which must have been 20 odd years ago. AFAIK I was the first to recommend it for the DIY community, it's since become a go-to source.
- Wed Apr 03, 2024 12:16 pm
- Forum: SLA PRO/ TLAH PRO
- Topic: Best rp600m replacement?
- Replies: 8
- Views: 392
Re: Best rp600m replacement?
Why SLA Pro?
- Wed Apr 03, 2024 7:56 am
- Forum: Tips, Techniques and Supplier Links
- Topic: Australian Options - Suppliers / Drivers etc
- Replies: 189
- Views: 441886
Re: Australian Options - Suppliers / Drivers etc
Depending on the price you might want to get them. The availability of recone kits is probably no worse than for any other driver.
- Tue Apr 02, 2024 6:46 am
- Forum: Tips, Techniques and Supplier Links
- Topic: Australian Options - Suppliers / Drivers etc
- Replies: 189
- Views: 441886
Re: Australian Options - Suppliers / Drivers etc
There may be kits available but they're sold in quantities of ten. The mounting is normal.
- Mon Apr 01, 2024 4:13 pm
- Forum: Tuba and Titan Pro-Sound Subwoofers
- Topic: Are 24 x T60-LAB15s Enough? ;)
- Replies: 77
- Views: 2990
Re: Are 24 x T60-LAB15s Enough? ;)
To cure Duratex leave the cabs in the summer sun for a day or two. Plastic corners on the cabs will keep them from sticking to each other.
- Sat Mar 30, 2024 4:06 pm
- Forum: Omni Bass/Key/PA Speakers
- Topic: Otop12 3012HO for vocals?
- Replies: 2
- Views: 257
Re: Otop12 3012HO for vocals?
There's no reason not to, even Levi Stubbs voice doesn't go below 100Hz. But you need to keep low frequencies that they can't reproduce out of them.
- Sat Mar 30, 2024 1:20 pm
- Forum: DR Horn Loaded Bass/Keyboard/PA Speakers
- Topic: Crossover question
- Replies: 8
- Views: 496
Re: Crossover question
The low frequency limit is determined by the Fs. At 1kHz Fs the F151 is OK at 1.2kHz. I could have gone lower with the NSD but didn't for two reasons. One was to allow more driver choices, the other being none of the speakers needed lower than 1.2kHz.
- Sat Mar 30, 2024 11:44 am
- Forum: DR Horn Loaded Bass/Keyboard/PA Speakers
- Topic: Crossover question
- Replies: 8
- Views: 496
Re: Crossover question
I haven't had any reports of failure. Also note that the F151M has higher sensitivity than the ASD 1001, so it doesn't need as much power, another reason why it can get away with a 3rd order high pass.
- Fri Mar 29, 2024 4:51 pm
- Forum: DR Horn Loaded Bass/Keyboard/PA Speakers
- Topic: Crossover question
- Replies: 8
- Views: 496
Re: Crossover question
I went 4th order with the 2kHz because the driver quality wasn't as high.
- Thu Mar 28, 2024 3:01 pm
- Forum: Jack
- Topic: Jack 110 questions
- Replies: 36
- Views: 2953
Re: Jack 110 questions
Tweeters don't hiss, electronics do. If tweeters hissed it would be present even with the amp turned off. You could reduce the tweeter level by wiring them all in series, but that will cut the signal level too.
- Wed Mar 27, 2024 7:08 am
- Forum: Tuba and Titan Pro-Sound Subwoofers
- Topic: Tuba 36
- Replies: 2
- Views: 133
Re: Tuba 36
They'll work, but not ideally, as they're spec'd for home theater, not pro-sound. Better options are the GRS 15PT-8, PRV 15W1000v2, Eminence Delta 15LF-4, Lavoce WXF15.400, PRV 15W1600, Dayton 15LF500-8, PRV 15SW2000-4, Eminence 3015LF.
- Tue Mar 26, 2024 11:00 am
- Forum: Build Threads
- Topic: 24" THTLP with TLAH towers
- Replies: 20
- Views: 615
Re: 24" THTLP with TLAH towers
Put the TLAH in the corners and toe them in. It will enhance their low end.
- Tue Mar 19, 2024 6:09 am
- Forum: Jack
- Topic: Jack 110 questions
- Replies: 36
- Views: 2953
Re: Jack 110 questions
No need to disconnect them, but they're not doing anything so there's no point in them being there.
- Mon Mar 18, 2024 10:41 pm
- Forum: Jack
- Topic: Jack 110 questions
- Replies: 36
- Views: 2953
Re: Jack 110 questions
You can't use off the shelf crossovers with piezos.