BillFitzmaurice.info

I was thinking 2 PLX1802 to run the DR280's, Thanks Depends on which driver you use. The 3012HO can take more than the 2512. I'd say the 1802s would be good for the 2512s and I'd step up to the 2502 for the 3012HOs. Of course they will be plenty loud with either amp - just a question of whether you...

What exactly is power shading? I do like the idea of 2 amps just in case one craps out.. I was thinking 2 PLX1802 to run the DR280's, and 5 PLX3602 for the 10 T60's? I also noticed the Crown Driverack series amps are pretty cheap compared to the QSC's.. Are they any good? Thanks Power shading is wh...

I never heard of premixed auto body filler. It can't be the same stuff and it can't work as fast as the real thing IMO. ! It is and it does. It's hanging on the wall of any discount Auto parts store and it's made by Bondo. I've been through two tubes of it building 7 cabinets. http://bondo.com/prod...

With that many cabs though, you might want to consider going with a Crown xti4002 for the tops - one will do all of them as it's 2 ohm stable on both channels. Buy 2 smaller amps, and let them coast. Bonus is you can power shade the top 2 from the bottom 2. Can't do that with only one amp. My turn ...

You can't go wrong with any of the Crown or QSC offerings. With that many cabs though, you might want to consider going with a Crown xti4002 for the tops - one will do all of them as it's 2 ohm stable on both channels. It'd be easier to power-match the subs in multiples of 4 to make best use of the ...

Personally, I couldn't think of a single use for a monitor like that. No matter how cheap they are.

Do you really want to mess with 70 volt setups?

Sony.....

You need to stick to one place. You've got questions posted all over the place. Go back and read some of the answers that have been given.

We're glad to help, but it feels like we're herding cats.

I've never used Bondo before, even for it's intended purpose of auto body filler. I would imagine that the instructions on the can assume the product will be applied in it's intended usage; on metal. Is there a different formula/ratio of Bondo-to-hardener that you guys use than what is listed on th...

This is a good alternative that I've considered.

Scroll down a ways to see the drawing.

http://billfitzmaurice.info/forum/viewt ... +two+poles

Just let the tophat attach to the bottom of the platform. It just has to be the surface mount type. The it's just a single layer platform with a little ridge around it to keep it from slipping.

http://www.ultimatesupport.com/product/BMB-200K

lancemhorsley wrote:Took a short break from the sla build today and played back yesterdays worship service via virtual sound check.

http://www.youtube.com/watch?v=BOzdhACS ... e=youtu.be

Very nice....gotta' love vocals through OT12s.

ncgrove wrote:Very cool! I hope you understand the importance of stacking all of them and taking a picture. I think it'll be a record, and the world will surely be a better place for it.

He may not have a ladder that tall....

Does your wife make you turn 'em around when company comes so the pretty part faces out?

As I see it, gain structure is not the issue. Maybe I'm not getting this, but if the internal gains are jacked up before the limiter that would cause what your seeing - wouldn't it? Have you looked at the internal gains to make sure they aren't pegged? i think his problem is that even with the limi...

I went ahead and removed the Cutlist screenshots from above so as to not compromise the build plans. But if anyone still have better ideas for getting the best out of the program as far as cut diagrams go please share. Ok, once again....put the parts for both cabs in the program - it will make bett...