BillFitzmaurice.info

hey guys, good catch on the brace part. It is a 24 inch wide cabinet. Here's what I did. I installed 2 braces at 8 inch centers using 1/2" baltic birch for each brace on the interior. When I got to putting the 2 into the 6/10 spot (the one you can see) I really didn't like how it looked. I know...

thanks guys! It was a fun project to build and I'll admit, I've done a fair bit of woodworking so while it was challenging, the directions are clear and it's a very "doable" project. My 14 yr old son and I built it for our garage. One thing that made it super easy was having a magnetic ang...

Hi everyone; Here are 4 shots of my T24. Pretty typical build with 5'x5' 1/2" baltic birch ply, BP-102 driver, speakon connector etc. Took 3 days to assemble and 1 to finish/paint. The only little nugget of info I'll pass along is in trimming the panel 7 overhang instead of using a circular saw...

so just following up regarding the remote software, it seems if you don't first use the firmware update (in my case anyway on 2 different computers) the remote software won't connect. Upon installing the firmware update connection is instantaneous. I didn't read this ANYWHERE and while possibly just...

Thanks Tom... thinking back, that's likely the ONLY thing I didn't do. Will try tonight.

Wondering if anyone has taken this concept any further? I'm wondering if having one of these http://www.ebay.com/itm/4-wire-Blue-Digital-Voltmeter-Panel-AC-0-500V-LCD-Alternating-Voltage-Meter-/161246440048?hash=item258b096a70:g:tMQAAMXQ1d1THscc would work? I'll state that I do have my iNUKE 3000 ds...

HI everyone; So my T24 is done and is looking really good. Photos to come in 2 days. I'm driving it with an iNUKE3000 with dsp. I've got a lenovo tablet running windows 8, loaded the software and it seems to be running fine but I cannot connect the tablet to the amp for some reason. I've confirmed t...

Hi everyone I've built my new effects rack and am very pleased. The handles on the iNUKE 3000 I have installed in the bottom of it stick out a bit further than I'd like and I'm considering taking them off, if this is possible. I have not popped the top off of the amp so I'm looking to people here wh...

so, I spoke to the shop where I got my iNUKE3000dsp and he's offered me one of these http://www.musiciansfriend.com/pro-audio/behringer-ultra-drive-pro-dcx2496-crossover which is slightly used for $200 Canadian cash. I think it looks like a no-brainer for what I need. Granted it's more than I need, ...

Hi I'm in the process of building a single T24, which is to be powered by my new iNUKE 3000dsp. I have a pair of 3-way cabs that are powered by a separate amp of course. Signal comes from my EQ split to each amp and I'll be low passing the iNUKE to the T24 as has been discussed here. My question is,...

actually .. I thought I was cured.. apparently not. Used to do house sound in Ontario at Kingswood music theatre. Worked with Roger Waters on a tour. 2" tascam reel to reel ('member those?) with 32k front of house cabs, L/R stacks and 15k at the rear. 109dB at the sound board (an analog 60 chan...

well.. after considerable thought (and 3 beers..) I decided to buy the iNUKE 3000. I think it was the third beer that really helped the decision. Honestly, after a fair bit of sober thought I realized that the (CAN) $ difference between the 2 amps was $140 and if I were to upgrade or build some new ...

Hey guys first off, sorry for the unintended cross post. I hate that and understand the appearance of "new poster" now messing up the order of a well established discussion board. I really was just looking for price advice and the discussion went another way. Regarding the 4 ohm question, ...

HI everyone So I'm planning on driving a single BP102 driver, which I haven't bought yet, so I could get the 4 ohm model. This amp will be only use for this purpose. So if it's bridged mono into 4 ohms, 750 w seems like that should be sufficient for the BP102. Here's the spec sheet on the driver htt...

got a quote for a new iNUKE1000 with dsp for $315 Canadian which includes shipping (plus tax of course).

Wondering what my fellow Canucks would say