BillFitzmaurice.info

Nice work! They won't let you down!

Bill Fitzmaurice wrote:Yes, by about 2dB.

It certainly would be a smart move If I made them with the premium drivers, the 3012HO and the NSD2005.
I know if I use the 2512 and the ASD1001 drivers in a cab I can go just as loud by getting more then 4 cabs but I want to go as loud possible with the least amount of cabs.

Of I use 8x 3012HO, do I get more maximum spl compared to the 2512? Yes, from not only the higher xmax but also higher sensitivity. With those I would go with the 2005, which has higher sensitivity than the ASD. With the 2512 I wouldn't bother, as the ASD is enough to match the 2512 output, unless ...

How does the ASD1001 compare to the NSD2005? I've looked at the parameters but I'm wondering if a ASD1001 would keep up with the 2512 at max spl? The only reason for using the 2005 is for a lower crossover frequency. It's In The Plans. :horse: About the only "downside" I can see with Otop...

Very nice! looks great

Doing so will be at your own risk. Be aware that you will be altering the horn path length and flair, so this will negatively affect performance. Also, IMVHO, building 8 with 3012HO is a waste of money. At 4 boxes per side, you won't really gain anything over the much cheaper 2512. I would also gen...

Bruce Weldy wrote:

Middelkevin wrote: 8x Otop j-array 3012LF and NSD2005 Loaded.

I hope that's a typo......you don't want the 3012LF, you want the 3012HO for the OT12s.

Exactly!

I'm wondering about how it's going to effect the design if i make the horn part of the otop's like the straight design and not like the bended wood?

I've been away for a while but I'm back! I know I need to cut the hole's in the side but I will do that once the outside of the cab is done, this makes it a lot easier to cut. Yesterday I started working on the line array and the monitors. On the first Friday of July I'm doing a outside gig in front...

Last weekend I used the same set for a setup in a tent. Here are some pictures: http://i59.tinypic.com/289zccj.jpg http://i57.tinypic.com/2lcr2nc.jpg http://i57.tinypic.com/2wm3ocz.jpg http://i58.tinypic.com/dzh0zb.jpg Later on that night the seat's were moved so people can dance. There was a DJ. ht...

Last weekend I had my fist gig with my BFM system, I was mixing a band that I often mix. Normally I use 2 DAP Clubmate 2 sets, The price/quality is amazing for such a set. On this gig I used 2 titan 48's in combination with two Jack 15's. Jack 15 specs: Mid driver: 1x Eminence 3015 High driver: 2x E...

This week I've started my build on some wedges and Otop j array's. I've got 2 Jack 15's and 2 Titan's 48. I'm planning to build more but for now it's enough. Here are a couple of photo's. I'll make more this week, I will also order the drivers. http://i59.tinypic.com/nzp2qw.jpg http://i58.tinypic.co...

I'm using them for live music and for some dj music.
Titan nr.1 is done and the second one is also nearly finished.

Here are some pictures:





They're beasts!

Nice Build mate. Re: Braces, use three for sure it would be in the plans definitely. They would be around 9 inches centre to centre, don't want to waste any glorious output on flexing the cabs timber :D Thanks! I will use three braces. I will saw them after work and install them. I've filled al the...

Great work and excellent tidy clean workshop! Haven't seen Harley around for a while, but I would like to nominate you for one of his awards :) It's easy to keep everything clean, and my work goes a lot quicker in a clean workshop :noob: Does anyone know how many braces I have to install at the hor...

That's a very good looking cab!