Search found 19 matches

by JerryAllen
Mon Oct 08, 2012 6:55 pm
Forum: Everything Else
Topic: Shocking - No Seriously Shocking
Replies: 4
Views: 1062

Re: Shocking - No Seriously Shocking

Went over to a friends old bar to help him hook up a sound system. I got shocked by the board when unplugging a trs out that goes to an amp on stage. The exposed portion (sleve) as well as the screws on the face of the board are what appear to be "hot". Everything is hooked up properly an...
by JerryAllen
Wed Sep 26, 2012 9:26 pm
Forum: YouTube Links
Topic: Jack 112's Sound check!
Replies: 6
Views: 2394

Re: Jack 112's Sound check!

Sounds much more hifi than my single j12. Way too many mids in mine to the point of shut it off.

Care to share the EQ settings?

Jerry
by JerryAllen
Mon Sep 10, 2012 4:26 pm
Forum: Everything Else
Topic: We were all newbies once....
Replies: 18
Views: 25739

Re: We were all newbies once....

Good reminder. I've been using forums for over a decade now, so i'm very familiar with forum etiquette. I have to remind myself that some people (older mostly) are only now getting into it. Hey I resemble that (older mostly) :lol: Been using forums for almost 3 decades before that was fidonet/usene...
by JerryAllen
Tue Aug 28, 2012 9:14 am
Forum: Everything Else
Topic: D-Fend
Replies: 68
Views: 10842

Re: D-Fend

I got a response from Eminence..... the units are in FCC testing right now.... possibly mid October 2012. Used with permission from the author. Jerry, Yes, it will be available in the US. The unit is off at FCC testing right now. As soon as we get the official "all clear" from them, we wil...
by JerryAllen
Thu Aug 23, 2012 5:19 pm
Forum: Everything Else
Topic: D-Fend
Replies: 68
Views: 10842

Re: D-Fend

Did this product go by the wayside?

Jerry
by JerryAllen
Fri Aug 17, 2012 2:31 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

Thanks Michael, I am using the 3012HO..... so.... 4 of the 8 are gonna be wood screws. I did order enough screws to do this so no harm just a little "dumb me" that I didn't see my error sooner. If it isn't in the plans and I missed it, it might be worth adding in an update to the plans to ...
by JerryAllen
Fri Aug 17, 2012 12:45 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

Hmmmmm........ page 10 install throat reflectors. Page 11-12 install driver spacer etc. Page 12 mark holes for mounting driver. I want hurricane nuts in the driver mount holes.... 4 holes can not reached. Argh! Install the throat reflectors AFTER mounting the driver :wall: Guess I will use 4 hurrica...
by JerryAllen
Wed Aug 15, 2012 9:01 pm
Forum: Everything Else
Topic: Cordless Drill
Replies: 21
Views: 2933

Re: Cordless Drill

Thats just funny! That would work! Really they are the master key but not for wheel clamps, we have 175 remote network sites, 4 of them have solor only and we go there once a year in the fall. People cut our locks out or bypass all the time...... The occasional flat or even 2 at a time on the truck ...
by JerryAllen
Wed Aug 15, 2012 3:21 pm
Forum: Everything Else
Topic: Cordless Drill
Replies: 21
Views: 2933

Re: Cordless Drill

+10000 on the Dewalts. I have a local store that sells the bare tool no battery not even a box for around $60 each. I have 5 batteries and almost every tool that Dewalt makes in the 18v line that is cordless. Wouldn't leave home without the 1/4 impact and the angle grinder.

Jerry
by JerryAllen
Wed Aug 15, 2012 9:01 am
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

Maybe if i get it right the first time, this time. :oops: It would be helpful if I really knew what I was doing... I have built a half dozen very complex RC model airplanes 80+" with hundreds of custom cut parts however, a razor saw, superglue and pin down blueprints with a complete list of wo...
by JerryAllen
Tue Aug 14, 2012 8:58 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

If I order again Leland is gonna put an ink bomb in :)

Jerry
by JerryAllen
Mon Aug 13, 2012 3:15 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

Another question. What do you use for the back panel attachment? Wood screws or hurricane nuts? Would E-Z Lok in 1/4 x 20 be OK? http://www.amazon.com/E-Z-LOK-Threaded-Insert-Thread/dp/B002WC8TUW/ref=pd_sbs_indust_6 More pictures I should have used the smaller head screws filling the holes around th...
by JerryAllen
Sun Aug 12, 2012 6:06 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

All the glue stays inside. The outside gets the cosmetics so maybe it won't leak, knock on wood. Shaping the Reflector is killing me! These (building #2 some day soon) will be used for both bass cab and a set of PA cabs. How much if any will sharp edges cause chuff/puff/huff in the Jack 12 for bass?...
by JerryAllen
Sun Aug 12, 2012 9:10 am
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

. . . A wood worker I am not. . . DeWalt, Jorgensen & Irwin, hmmm, a little sandbagging going on? Looks good, and clean. Aaron The pipe clamps are my father in laws, the Irwins are his as well, finish carpenter/cabinet maker. The Dewalts I use every day in my job which has nothing to do with wo...
by JerryAllen
Sat Aug 11, 2012 2:07 pm
Forum: Build Threads
Topic: Jack 12 Pictures
Replies: 20
Views: 4565

Re: Jack 12 Pictures

Started this build Monday 8/6 from a flat pack, today I put the sides on. Not much for patience but all in all I am pretty happy with it so far..... I have some cleanup to do, filling and shape the throat, add the driver spacer etc. Had quite a twist in it about 3mm maybe 4mm but it pulled out with ...