BillFitzmaurice.info

Found a good deal on a Driverack PX and a QSX PLX3402 (700W Stereo @ 8Ohms). So for now, I'll be pairing the (2) 30" T39 with Delta12LF's with the above setup, running the amp in parallel mode. I need some advice on setting limiters. The Driverack PX works by setting the threshold of signal lev...

The 3012LF can take take the full 60 volts in a T39. That's 450 watts. So, to run two per side - you need an amp that will run 900-1000 watts at 4 ohms. I'll only be running (2) T39's total (v-plated, wall loaded), not two per side, however this is good information to plan for an additional two cab...

At this point you may be thinking you bought a pup. Not so, 150W of BFM sub is louder than 500W of direct radiator. I don't have a link for you but if you search on setting limiter and crossover you will find lots of good info. I definitely know I didn't buy pup(s)! These two 30" T39's will ha...

To my understanding they handle 500W @ 8ohms. That's a thermal rating, which is meaningless. D12LF is displacement limited to 35 volts, which is roughly 150 watts. Anything more will not give additional output. Right on, so that means... (VxV)/R = W And upgrading to the 3012LF's, I should stick to ...

To my understanding they handle 500W @ 8ohms. As per the plans: The Delta 12LF has a higher rated voice coil, but it’s also displacement limited to 35 volts. While you should run the subs in mono, that doesn't necessarily mean bridged. If your amp puts out the required power, you should run in ster...

Hi all, I've always used powered speakers, so I'm new to the amp/crossover/eq/limiter/rta game. :o I'll be picking up a pair of 30" T39's with Delta 12LF drivers, and am looking for an optimal amp to power them with. To my understanding they handle 500W @ 8ohms. I also understand that the BFM c...