BillFitzmaurice.info

Problem/Confusion - Answered/Solved!!! "more of a confusion" Thank You for your patience, finally I get it. Xovers input A goes to outs 1/2, input B goes to outs 3/4. " A&B lows summed to outs 1/3" Mixer mono out to xover input a - out to 1/2 to amps. When I left the cable to...

I bought the mixer used, could the previous owner changed something internally? Can anyone out there duplicate the problem I"m having? The thing thats getting at me is why the bass has a fuller sound? Do I need to redo the xover settings "gain, limiting" with the stereo out engaged as...

Ok, thanks I understand, but there is one thing thats driving me crazy, when I turn the dial up on the stereo out it adds bass volume only to the the sub channel not the top channel. I've switched the L/R from the mixer to the B input on the xover and there is no added volume to the top channel. The...

I forgot this is what Ashly's manual says: 5.6 Stereo Output Level This is the main master gain which sets the operating level for the entire mixer. This control does not effect the mono output level. 5.8 Mono Level This is the master gain control for the mono output, which is the combined signal of...

Heres the setup: Source(cd has mono option), to mixer(Ashly LX308), to crossover(BBE DS24), to amp(QSC). I've always used the mono out from mixer to the xover's input A to xover's top(output 2) and sub(output 1) outs for 1 amp operation. The other day I ran 1 amp for tops, 1 amp for subs (the correc...

DAC = digital analouge converter, should solve the problem.

Does anbody know/remember if trapezoid stand used one or two 4'x8' sheets of plywood and whats thickness?

Yes, the tweeters are working fine, thats why I'm puzzeled as to what are they for " protection or sound"
The speaker that has the "cooked induction coil former" as Mr. "horst" stated is the one that sounds bad "tweeter".

Mr. Brent is a resistor used to protect the tweeter? I'm asking because 2 of the 5 speakers I bought have the resistor knocked off and I hear no difference from the other 2. Just to let everyone know I bought 5 ev sx300 from a bar/lounge at a ridiculus price, in the hope to resale them to fund some ...

Thanks for all your help, one more thing what does the white rectangle looking thing do?

Just opened the cab and found this...
Do I need to replace the whole xover?

I believe I've found the problem, could a tweeter thats wired wrong in one of the speakers "reversed polarity" cause all of the speakers to sound bad?
I mean the sizzle part of the music?

I had the speakers horizontally 2 on the bottom and 2 on top of them, the thing is when I had them 2 per amp channel which is 4 ohms they sounded normal but once I ran all 4 to one channel the sound was horrible.
I'll try different positions to hear any difference. And thanks for the help.

Hi everyone, is it normal for sound to degrade when running more than 1 speaker per amp channel? Testing 2 ohm load on QSC RMX5050 with
4 EV SX300 (8 ohm ea. equals 2 ohm load).