BillFitzmaurice.info

Cheers for that Grant, I was wondering why I couldn't find it anymore...

Harley, have you tried Selleys Liquid Nails Platinum, coz I've used it on about a dozen cabs and other assorted projects and it works fine for me.

I recommend the Selleys Liquid Nails Platinum, should be widely available in Oz .

1) On page 4, it says to draw two 14" radius arcs from A & B. Needs to say 8-3/4". Minor but will confuse builders. Fixed, thanks. 2) The holes shown for the Top Hat on the bottom & duct do not line up. They are off by 3/4", which a top hot will not fit through :roll: The que...

So is the best glue to join the tweeters ABS cement, or PVC glue? It was my understanding that the ABS cement actually formed a chemical bond, while the PVC glue just formed a brittle surface fillet. BTW my "acetone/tweeter scraps" mix has produced a strong bond, that is able to withstand ...

I ticked the "Open box and check contents" option at Shipito, and that's where they discovered the glue, and informed me DHL wouldn't ship it.
Great service and speedy delivery from all concerned.

Can't source ABS glue locally, and DHL won't ship flammable liquids, so... I searched the forum, and found references to BFM's DIY ABS glue, but couldn't find the original thread... so... I saved all the offcuts and scurf when I trimmed my piezos, and soaked them in a bit of acetone overnight. Today...

I got 200 tee nuts in 4 sizes from this link... b4 I read this thread Can't really comment on quality, i haven't used them yet

http://elraco.com.au/index.php?cPath=11_334_341

Delivery was a couple of weeks, they must have been out of stock.

Thanks for the props - its a nice windy day, sanding the cabs out in the yard methinks...
big box of drivers, tweets, crossovers etc arrived a week or so ago

Wegehorn 6 + 3 x Wedgehorn 6 Lite.

W6's out of 7mm 3-ply (that's all I could get )
If they're too flabby, they will do nicely as emergency refuges for homeless ladybugs.

I'll do that the same day that Lamborghini comes out with a design similar to the KIA Rio.

lol.. I get the picture

I'll towel that idea, then, I never seen that Bose system until this morning. Thanks for the prompt response!

Are there any plans to do a BFM pole/column type speaker design, similar to the Bose L1?
A column of cross-firing piezos matched with a Jack10 for bass could be a winner

http://www.bose.com/controller?url=/sho ... /index.jsp

Thanks guys, I'll swap out the temporary 1/4" for a Neutrik Speakon!

I used Selleys Liquid Nails Platinum at $10/cartridge from the local Mitre10 hardware here on the east coast of Australia and got a Jack10 and an XF 2x10 easily out of one cartridge...
http://www.selleys.com.au/adhesives/con ... s-platinum

What jack sockets* are best for a sealed cab? Having gone to great lengths to ensure that the cab is airtight?

*1/4", XLR, Speakon...