BillFitzmaurice.info

Bit over the top.

Also, you could have kept that whole post shorter by simply saying "Shut up you w@nker, you haven't even built one."

I don't know about patience, but the right tools and materials would help a lot. I'm guessing it would have some sort of high fill primer, maybe primed and sanded a couple of times, then a basecoat of darker and harder stuff, more sanding, maybe repeat, and topcoat, sand and cut and polish. All but ...

I'm not trying to offend anyone, and I realize my post was not contributing to the question in the original post. I think if this happened in a bar I would not have posted at all. Although yelling down some nobody in a bar who's passed comment about the band or whatever doesn't seem very productive....

So "Some a$$hole" has criticised your work, and you didn't like the way he did it. So then you " blitzed him with "room cancellation modes", "boundary reflections", "phase coherence", "bandwidth equalization" and any other term I could work into...

Hi. Can I ask a few questions re the laser cutting project? In general, what is the thickness of the laser cut? If you have an insert (a tab?) that will go into a slot, is the slot drawn 1/2 a mm larger that the tab? Or if you provided the drawings with the tab and slot the same dimensions, would th...

Nice set up. I hope to build the same.

Can someone please explain this to me?

"I meant that 2x DR200's don't match 2x T39's when:

a) Using BP102's
b) You EQ the subs flat by dropping 60-100 by 4-6 dB."

Thanks.

Thank you for that guys. Excellent work.

If you happen to be a diver, an old reg can be converted to run air tools, I know a guy who build his whole deck on one bottle fill and had buckets to spare on his nail gun.

Test resistance of each multimeter lead individually by removing one, and putting the probe of the remaining one into the empty socket.

I have worked in a boat builders, we used to put on 3 or so gloves on top of each other, when one gets to dirty or rips you peel it off and have a nice clean one underneath, saves time when the resins are going off.

First, a brief background: I'm a bass player in a pub rock band playing covers in small to medium venues, I have a Samack 4 string and a Fender M-80 combo 1 x 15" rated at 180W into 4, 100 into 8 ohm loads, I run the bass through the PA for gigs. Through running a open mike night at a local bar...

Good tip.