BillFitzmaurice.info

Ohm's Law answers this. With (voltage) amplifiers like what we all use, the amperage and impedance fluctuate, in opposite directions. IOW, as the impedance goes down, the amperage goes up, and vice-versa. For the most part, voltage stays constant, but can go up or down, dependent on a number of fac...

Say for instance that you have a speaker that is 400w/8ohms… It would need 56 volts… Now if i would add another speaker on the same channel that would be 800w/4ohms… Would they also only need 56 volts? Im just confused on how you can add more speakers and still require the same amount of voltage fro...

How will the amp know what kind of load i WILL be putting on it without testing it with that exact load? I will be putting a 4ohm load on it, so how do I know that the reading I get from the meter will be the voltage output @ a 4 ohms? (Sorry for these simple questions, Im not that electrical lol). ...

In the XTI you can set the limiter by voltage which is great. But in every model XTI and in every setting (stereo,bridged) the max voltage shown is 56v. Im sure that my XTI 2002 puts out more than 56V bridged, that is about 800watts at 4ohms. Using the formula[(sqrt(watts x ohms)] the max output vol...

Just now getting back to the site... I fixed the faded... had to de-solder it and get all of the grime out... mixer works great now!!

wow thanks

Sorry Bones, it must be the Aussie in me. What I mean is: Have you tried contacting Yamaha Corp to see if they have a fader as a spare part. I take it from your post you are looking to replace a fader on a Yammy desk? Yes... I havent contacted them yet, figured id look for the part elsewhere first..

Grant Bunter wrote:Sorry to state the obvious, but do Yamaha do spares?

Not sure what you mean

Uploaded with ImageShack.us



Uploaded with ImageShack.us

haha.. sorry about that, the difference at high volumes wasnt that noticeable to my ear

Just went from 8 to 12 tweeters and figured id record a snippet...

http://www.youtube.com/watch?v=XCkkX1XQ ... e=youtu.be

16 tweets is too high... have to use 12

DJ Higgumz wrote:did you post a video of those titans on youtube? i thought i saw some with the silver braces. i must say it looks good! you should have put the vertical braces centered though!

wasnt me..

I love the way these sound.. Nice looking build

I only seen the option for 4 and 8 tweeters, didnt know i could do 16.. would they fit? it looks like the 8 tweeters is taking up the majority of space