BillFitzmaurice.info

Great looking box Doug. Where did you get the jig for your company logo routed into the back of the box?

Seriously if you have something like Shure M447-G needles and you reverse the tonearm weight you should not skip at all. . Just to clearify something about the Technics SL series tuntables. Reversing the weight does absolutely nothing. Its a weight and no matter which direction you put it in its st...

This may be out of the ordinary but maybe standing upright in v shape firing at the wall to the left of the dj booth(if you are looking at the dj). Follow the instructions sticky for wall loading to have proper distance off the wall. Might just work out for you.

Alot has to do with what type of needle,cartridge setup you are using and how the tone arm is calibrated. Also try moving the T48 away from you dj setup. This kind of threw up a red flag for me. The way this comment appears to me is that there is some extra weight to keep the needle in the groove w...

It has become evident that the 1850 is not enough amp for my t30 subs (4012HO drvs). I have to run the 1850 attenuators almost to clipping to get the t30's to sound the way I like, but the GX5 I had head room to spare when driving the sub. I will see if I can get a picture of the cafeteria or at le...

I run Serato with 1200s and have played at clubs where the dj booth was on top of the bassbins and never had a problem. Alot has to do with what type of needle,cartridge setup you are using and how the tone arm is calibrated. Also try moving the T48 away from you dj setup.

What's the H & V dispersion of that horn? Parts Express does not state what the angles are.

I am using Ramsdell Pro Audio BP21s. Its sort of a reverse loaded ported/bandpass type of enclosure with a P-Audio SD21 21" driver and I have a pair of them.

Keep in mind, less weight means less components. For instantance, and this is not to talk bad about Crown but I use to have a rack of QSC RMX 1450's and sold them for a rack of XTI1000's. Power rating wise they are the same, but the weight difference in the XTI at 18lbs vs the RMX at 45lbs. Thats wh...

[ The answer unfortunately isn't an auto-RTA like the dbx PA or 2496 has. Take Care! Good Luck! Phil P.S. Makes me super glad I went with the BBE DS series as a starting off bang-to-buck DSP several years back. I will have to disagree here. I own 2 DBX Driverack 260s on 2 seperate systems. Both are...

I see I am not the only one who thinks by adding a cat to a T48 you gain an extra 3DB.

Very nice cabs.

I my self are running the xti amps on my system as follows 2-XTI1000-bridged mono to 4 T36 21"wide with definimax 12 1- XTI 1000-stereo to OT12 12" delta pro 12a 1- XTI 1000 stereo to OT12 nsd2002 hf all running from a dbx 260 I have alittle bit of constructive advice. I notice a few are c...

You are on the right track with your speaker choice. My only advice, and this is not to talk down QSC at all, but the RMX series of amps are very heavy. All the amps are between 40 to 50 lbs each and that is alot of weight to move around. Especially at the end of the gig. I just swapped out my RMX a...

i have been building sound systems for around 15 years now. about 10 years ago i worked for sound advice oin florida and built a custom system in a chevy blazer which consisted of 20 kicker 12 subs. at the dash the spl was around 163db. having said that i just finished up one of two t-36 dual defini...