BillFitzmaurice.info

Thanks Bill.

Last step is to make the plexi BFM designers plate for authenticity.

That and maybe sew up a canvass rain cover for travel

Been enjoying the cab. Using a Markbass nano amp.

I keep returning to wondering how the front wave off the
driver cone ends up interacting with the rear wave that vents out the ducts? Can anyone discuss this interaction to better visualize the dynamics please.

Wrappped up build. Sounds great with an emminence 2510.
Overall 22#. Used semi gloss spray on unside of horn and rest of external surfaces got 3 coats Exohyde texture paint.
Machined some corner bumpers from hdpe on cnc router.

clamps removed & a bit of sanding

Thanks Will leave it alone as designed!

That duct sheath took some force to get bent into position even with making sure I had the bend bias going in the right
direction. Was able though to clamp it like horn sheath and did not need to add staples.

Reposting to hopefully get Bill's take on the possibility: "Wondering if there's a reason to NOT extend the baffle plane out to meet the side walls with a fill in pair of vertical rectangles? Could be problematic if you wanted to access nuts holding driver in place? This would decrease interior...

Keryn,

Those corners look perfect with the small radius that suits the 1/4 baltic. Thanks for pointing out.

pictures

Good progress on the box. Sayisfying trimming the horn sheath to sides joint and giving it a little radius. Have been mostly able to use 23 Ga. x 1/2" pin nails to hold things in place till PL cures. A few spots needing staples. Wondering if there's a reason to NOT extend the baffle plane out t...

Is there also any frrdback folks might like to share regarding this La Voce model? I just came upon it when performing a search for bass guitar speaker on their main site: NBASS10-20 10" BASS GUITAR SPEAKER NEODYMIUM MAGNET STEEL BASKET DRIVERFEATURES - 2 INCH COPPER VOICE COIL - 95,5 dB/SPL SE...

I'll try emailing them to see if they will commit to one or the other value.

Andrew / navigator stoves

The X Max appears to be 4.8 for the WSF 102.5

if one is building a single driver 1x10 w/o tweets, what would be the most appropriate speaker to choose? For elec bass that is.... Somehow the discussion of the WSF 102.5 in the manual led me to believe this was the best choice? Perhaps it is IF tweets are added to take over the midrange responsibi...

For elec bass driver, choose LaVoce WSF 102.5 over Neo WAN 102.5 due to former's larger X Max? The weights dont seem that different?

Thanks, Andrew

Might try hollowing out backside?