BillFitzmaurice.info

Indeed, doing like this I can find the power full tuning. Master full and master 1/3... more gain -> staturation, fuzz without pedal

Seth, Thanks for your feeb back, you are true I try again with my headphones and at the same level of Gain and Master switches position I have the same result. So it is not from the Jack ! but from BQ250. I try to change the passive/active input switch, the output level reduce a bit but if I turn sw...

I try today, It is strange. I use aux in and I push the volume, sound was lound and clear (through TC ELECTRONICS BQ250) Then I try with 2 bass, the only difference was the output power of the bass but with the same final sound level I have the same effect. In fact it sounds more like overdrive rath...

Thanks, I will try this weekend, I am aslo not 100% sure it came from the cab cause I plug my headphone instead the cab with same adjustement and I can heard the same kind of parasite sound. My bass is passive one, I will try with another one and also with sound from aux input to see...

Hey Guys,

I am in trouble, when I push the sound a lot with lot of low frequencies, I can heard parasite noises like "BZZZZ". I will check the cable tight and the crossover plate if I can add stiffer fixation... May you have other ideas of what can give those parasite noises ?

In other hand , I finalize the jack As said before I use marpple wood sheet then I had corners and handle https://nsm09.casimages.com/img/2021/11/02//mini_21110206292126040617651298.jpg https://nsm09.casimages.com/img/2021/11/02//21110206292126040617651298.jpg https://nsm09.casimages.com/img/2021/11...

1 no tweeter, 1 low tweeter (4 ohm resistance in serial on the high pass filter input), 1 full tweeter (direct input on the high pass filter If you're saying what I think you're saying don't do that. There is a 4 ohm resistor in the high pass filter. Another 4 ohm resistor in series with it will ha...

Hey Guys I am close to finish (I take my time) I finaly order the Cpas Find some pictures of the work I machine the rear panel to add the speakon connectors plate https://nsm09.casimages.com/img/2021/07/26//mini_21072607402426040617506790.jpg Some electrical circuit test (I build it with a 3 way swi...

It is what I thought when I saw them and the tinny size VS the 5.7 muF (which is MKP 400VDC)

I will buy the same type than 5.7 muF: 15 muF MKP up to 400VDC (I think it is close to 200 VAC)
https://www.toutlehautparleur.com/media ... PB_PPE.pdf

Thanks for the quick feed back some pictures of the capacitor data sheet and crossover circuit https://www.casimages.com/i/21072702565026040617507734.jpg.html][IMG]https://nsm09.casimages.com/img/2021/07/27//21072702565026040617507734.jpg https://www.casimages.com/i/21072703005226040617507738.jpg.ht...

Hey guys I move on the build, I use 4 tweeters and I fix them with screws. I use rigid 1.5² section cable to wire them together (With rigid wires it is easier to weld cause wires do not move) I also start the filters. I can see the capacity I have (15 mu F) is only 35V (instead 400 Vfor the 5.6 mu F...

Hey Guys Some news. I start my Jack 10 builds. I find plywood 12 mm tick (I bought a 2.5 x 1.22 m for 40 €, but the quality was poor and the sheet delaminates ... fortunatly I can save half to build the jack) For your info I found glue with same specs than loctite PL : Bostic "EXTERIEUR BOIS EX...

Thanks for the quick feedback Regarding plywood, I will wait. In fact it is possible to find 12 mm but just during next weeks it is not possible due to the lockout ( :cop: ) I maybe train to my wood machining skills with the 15 mm then do the real job in few weeks with 12 mm one.. I do a quick calcu...

Hey, I am starting to build my frist jack 10. In located in France. First I have a question about plywood tickness : in Bill's doc, he asks to use 1/2 inche = 12 mm plywood. With the lockdown we have here, I have difficulties to get some, but in my own stock 15 mm tick one -> Is it a big issue to us...