BillFitzmaurice.info

If there are any Danes on this site, I'll be selling my THT for any offer. In Danish: I har måske set byggetråden med min 12" GRS THT. Jeg skal ud af hobbyen, fordi jeg bruger for meget tid på det som famiilefar - så jeg "sælger" min THT til det første bud jeg får, hvis bare du selv k...

Just to check up on answers. Thank you. Everything is completely fine - I just spend way too much time thinking about speakers. and things i could do with speakers. If it was a true hobby, I'd have a good time building them. But I spend 10% of the time enjoying the hobby, and 90% of the time worryin...

Sorry guys. I won't be finishing the project anyway. Thanks for all your answers. I'll say goodbye (again!) - and hopefully this time, I'll be able to stay off the internet and speaker addiction for good. I actually just took a drill trough all "DIY" components I have lying around. Not the...

Good job Jens. I'm not sure my mind would have come up with that solution on its own. Very creative :thumbsup: Is it your intention to use them for the outdoor deal? Or are you still planning on using the boominator for that? Thank you. I'm thinking the boominator, but it could be fun with these. I...

Not so pretty. But it'll work. Next challenge is to seal it properly.

Read the instructions. Twice. And then one more time.
Then check the drivers you're buying. Then check them again.
I'll probably be better at cutting them as I go along. First one is not pretty. I'll smooth it out with some acrylic filler. Wood filler, perhaps?

Makes sense. Hope it'll work out!

Drivers has arrived

SLA is a bit simpler to build than the tubas.

Boxes dryfitted

Ah damn. I thought the "1/2 inch voice coil" was the dome size. My tweeter is 1 inch. So pretty far from the plans, I hope it doesn't screw things up. How would you mount the 4PF-8? I'm thinking about front-mouting then because it's easier - and want to make some grills for them anyway. Do...

Cool! I have just never seen subs turned away from audiences outside. Like, never. That's why I thought it was mandatory to face the horn mouth the same way as the tops, outside.

Question: is bass truly omni-directional, og is it only inside?
I'm thinking about placing the boominator on top of the table tuba, but then the TT will fire to the right, instead of front like the tops.

Their data is flawed, because modeling programs are only accurate up to about 200Hz. They also show results if mounted in a wall baffle, not enclosures of equal size. Worse, they measure one at 2.83v, one at 4.0 v. I don't know what that's all about, but it accounts for a 3dB difference. Thanks aga...

I thought you meant the Goldwood GW-4028 and the GRS 4FR-8. The GRS4PF-8 is similar to the 4FR-8, I'd get whichever is less expensive. I should probably be more specific, when I'm writing comparisons. Thank you, Bill. Guess I'll take your word for it. Loudspeaker database seems to show quite the di...